[prev in list] [next in list] [prev in thread] [next in thread] 

List:       familiar
Subject:    Re: [Familiar] Re: Fatal ipkg upgrade from familiar-base 5.0-41 to 5.1
From:       kleag () free ! fr
Date:       2004-09-01 17:21:19
Message-ID: 1094059279.4136050f64734 () imp2-q ! free ! fr
[Download RAW message or body]

Sorry,

Correcting myself, the upgrade works ! In fact, the first reboot took no less
than 1 hour to finish (a timout somewhere ?). The others took less time but a
long time anyway.
Note that I have not been able to test USB networking at this time.

Cheers,

Kleag
Selon kleag@free.fr:

> Hi,
>
> After the Cristina's mail, I tried the upgrade of my H5500
> (opie-familiar-unstable14). I saw again unresolved symbols, so I tried to not
> load the problematic modules. But my ipaq cannot boot again. See below the
> boot
> trace. It stalls after loading usb-ohci-h5400...
>
> Any more ideas ?
>
> Kleag
> Selon Cristina Sandoval <cristina@visual-tools.com>:
>
> > Hello,
> >
> > I also did the fatal upgrade of the familiar-base package. I tried to to
> > bring up my iPAQ h5550 without reflashing, mounting the root image and
> > trying to restore the affected files. It wasn't succesfull.
> >
> > Finally I reflased the  iPAQ, and tomorrow I have done the upgrade,
> > everything it right and works. It seems that the familiar-base problem
> > has already been solved.
> >
> boot>
> boot> boot
> booting jffs2...
> booting boot/zImage from partition >root<
> Scanning all of flash for your JFFS2 convenience. Est Time: 6-12 seconds!
> build_list: max = 01FBFFBC
> ...
> dir entries = 000009E7
> frag entries = 00002791
> +4 increments = 00000000
> +file_offset increments = 00005E7C
> loaded file of size = 0x000A8108 at location 0xA0008000
> kernel partition base A0008000
> kernel_magic=E1A00000
> kernel_region_words[9]=016F2818
> Linux ELF flash_imgstart=50040000 size=01FC0000 dest=A0000000 offset=00008000
> MMU Control=00000079
> MMU PIDVAM=00000000
> Skipping kernel copy by request.
> A0008000: E1A00000
> A0008004: E1A00000
> A0008008: E1A00000
> A000800C: E1A00000
> A0008010: E1A00000
> A0008014: E1A00000
> A0008018: E1A00000
> A000801C: E1A00000
> A0008020: EA000002
> A0008024: 016F2818
> root_filesystem_name=ramdisk
> Grabbed linuxargs, argc = 00000001
> Using mach_type 000000DC
> setting boot parameters to
> noinitrd root=/dev/mtdblock1 init=/linuxrc console=ttyS0 si0 single single
> Making core tag at A0000100
> Making cmdline tag at A0000114
> Making mem32 tag at A00001C4
> command line is:
> mtdparts=ipaq:0x00040000@0x00000000(bootldr)ro,0x01FC0000@0x0
> Disabling LCD controller
> linuxEntryPoint=A0008000
> Booting Linux image
> Uncompressing Linux........................................... done, booting
> t.
> Linux version 2.4.19-rmk6-pxa1-hh36 (pb@dixie) (gcc version 3.3.1 20030720
> (pr4
> CPU: XScale-PXA255 revision 6
> Machine: HP iPAQ H5400
> Memory clock: 99.53MHz (*27)
> Run Mode clock: 199.07MHz (*2)
> Turbo Mode clock: 398.13MHz (*2.0, active)
> Reserved 4096 bytes at a3fff000 for RTC hack
> Restoring saved RCNR value to 1093853280 (from c3fff000)
> On node 0 totalpages: 16384
> zone(0): 16384 pages.
> zone(1): 0 pages.
> zone(2): 0 pages.
> Kernel command line:
> mtdparts=ipaq:0x00040000@0x00000000(bootldr)ro,0x01FC0000.
> Console: colour dummy device 80x30
> Calibrating delay loop... 397.31 BogoMIPS
> Memory: 64MB = 64MB total
> Memory: 63292KB available (1092K code, 331K data, 68K init)
> Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
> Inode cache hash table entries: 4096 (order: 3, 32768 bytes)
> Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
> Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
> Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
> POSIX conformance testing by UNIFIX
> Linux NET4.0 for Linux 2.4
> Based upon Swansea University Computer Society NET3.039
> Initializing RT netlink socket
> Using PXA255 frequency points.
> Registering CPU frequency change support.
> CPU clock: 398.131 MHz (99.000-400.000 MHz)
> Changing CPU frequency to 398 Mhz (PXbus=196Mhz).
> Starting kswapd
> devfs: v1.12a (20020514) Richard Gooch (rgooch@atnf.csiro.au)
> devfs: boot_options: 0x1
> JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
> Console: switching to colour frame buffer device 30x40
> mq1100fb: fb0: MQ1100 frame buffer device 240x320-16bpp
> iPAQ H3600 keyboard driver v1.0.1
> pty: 256 Unix98 ptys configured
> Serial driver version 5.05c (2001-07-08) with no serial options enabled
> ttyS00 at 0x0000 (irq = 14) is a PXA UART
> ttyS01 at 0x0000 (irq = 13) is a PXA UART
> ttyS02 at 0x0000 (irq = 12) is a PXA UART
> RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
> iPAQ flash: probing 32-bit flash bus, window=c48c2000 with CFI.
> cfi_cmdset_0001: Erase suspend on write enabled
> Using buffer write method
> iPAQ flash: found 33554432 bytes
> iPAQ flash: probing 32-bit flash bus, window=c68c2000 with CFI.
> cfi_cmdset_0001: Erase suspend on write enabled
> Using buffer write method
> iPAQ flash: found 16777216 bytes
> 2 cmdlinepart partitions found on MTD device ipaq
> Using dynamic partition definition
> Creating 2 MTD partitions on "ipaq":
> 0x00000000-0x00040000 : "bootldr"
> mtd: Giving out device 0 to bootldr
> 0x00040000-0x02000000 : "root"
> mtd: Giving out device 1 to root
> Creating 2 MTD partitions on "IPAQ flash bank 2":
> 0x00000000-0x00fc0000 : "second H3XXX root jffs2"
> mtd: Giving out device 2 to second H3XXX root jffs2
> 0x00fc0000-0x01000000 : "second asset"
> mtd: Giving out device 3 to second asset
> NET4: Linux TCP/IP 1.0 for NET4.0
> IP Protocols: ICMP, UDP, TCP, IGMP
> IP: routing cache hash table of 512 buckets, 4Kbytes
> TCP: Hash tables configured (established 4096 bind 4096)
> NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
> NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com
> mtdblock_open
> ok
> VFS: Mounted root (jffs2 filesystem).
> Mounted devfs on /dev
> Freeing init memory: 68K
> Setting up RAMFS, please wait...
> depmod: *** Unresolved symbols in
> /lib/modules/2.4.19-rmk6-pxa1-hh36/misc/snd-o
> depmod:         pxa_i2s_init
> depmod:         pxa_i2s_set_samplerate
> depmod:         pxa_i2s_shutdown
> Using /lib/modules/2.4.19-rmk6-pxa1-hh36/kernel/arch/arm/mach-ipaq/ipaq_hal.o
> H3600 Registering HAL abstraction layer
> Using
> /lib/modules/2.4.19-rmk6-pxa1-hh36/kernel/arch/arm/mach-ipaq/ipaq-mtd-aso
> Using
> /lib/modules/2.4.19-rmk6-pxa1-hh36/kernel/arch/arm/mach-pxa/h3600_asic_bo
> Using
> /lib/modules/2.4.19-rmk6-pxa1-hh36/kernel/arch/arm/mach-pxa/h5400_asic.o
> register_procfs
> register_procfs: done
> Setting up some devices
> Executing /sbin/init...
> INIT: version 2.85 booting
> Not recalculating module dependencies
> Loading modules: snd-h5400-ak4535 Using
> /lib/modules/2.4.19-rmk6-pxa1-hh36/miso
> Using /lib/modules/2.4.19-rmk6-pxa1-hh36/kernel/drivers/i2c/i2c-core.o
> Using /lib/modules/2.4.19-rmk6-pxa1-hh36/misc/snd-ak4535.o
> Using /lib/modules/2.4.19-rmk6-pxa1-hh36/misc/snd-page-alloc.o
> Using /lib/modules/2.4.19-rmk6-pxa1-hh36/misc/snd-timer.o
> Using /lib/modules/2.4.19-rmk6-pxa1-hh36/misc/snd-pcm.o
> Using /lib/modules/2.4.19-rmk6-pxa1-hh36/misc/snd-h5400-ak4535.o
> insmod: unresolved symbol pxa_i2s_init
> insmod: unresolved symbol pxa_i2s_set_samplerate
> insmod: unresolved symbol pxa_i2s_shutdown
> modprobe: failed to load module snd-h5400-ak4535
> snd-pxa-uda1380 Using /lib/modules/2.4.19-rmk6-pxa1-hh36/misc/snd-uda1380.o
> uda1380_init:
> Using /lib/modules/2.4.19-rmk6-pxa1-hh36/misc/snd-pxa-uda1380.o
> pxa_uda1380_init
> insmod: init_module: snd-pxa-uda1380: No such device
> modprobe: failed to load module snd-pxa-uda1380
> snd-pcm-oss Using /lib/modules/2.4.19-rmk6-pxa1-hh36/misc/snd-mixer-oss.o
> Using /lib/modules/2.4.19-rmk6-pxa1-hh36/misc/snd-pcm-oss.o
> snd-mixer-oss modprobe: failed to load module snd-mixer-oss
> at76c503-rfmd Using
> /lib/modules/2.4.19-rmk6-pxa1-hh36/kernel/drivers/usb/usbco
> usb.c: registered new driver usbdevfs
> usb.c: registered new driver hub
> Using /lib/modules/2.4.19-rmk6-pxa1-hh36/kernel/drivers/usb/at76c503.o
> at76c503.c: Generic Atmel at76c503/at76c505 routines v0.11beta2
> Using /lib/modules/2.4.19-rmk6-pxa1-hh36/kernel/drivers/usb/usbdfu.o
> usbdfu.c: USB Device Fimware Upgrade (DFU) handler v0.11beta2
> usb.c: registered new driver usbdfu
> Using /lib/modules/2.4.19-rmk6-pxa1-hh36/kernel/drivers/usb/at76c503-rfmd.o
> at76c503-rfmd.c: Atmel at76c503 (RFMD) Wireless LAN Driver v0.11beta2
> usb.c: registered new driver at76c503-rfmd
> hci_uart Using
> /lib/modules/2.4.19-rmk6-pxa1-hh36/kernel/net/bluetooth/bluez.o
> BlueZ Core ver 2.3 Copyright (C) 2000,2001 Qualcomm Inc
> Written 2000,2001 by Maxim Krasnyansky <maxk@qualcomm.com>
> Using /lib/modules/2.4.19-rmk6-pxa1-hh36/kernel/drivers/bluetooth/hci_uart.o
> BlueZ HCI UART driver ver 2.1 Copyright (C) 2000,2001 Qualcomm Inc
> Written 2000,2001 by Maxim Krasnyansky <maxk@qualcomm.com>
> l2cap Using /lib/modules/2.4.19-rmk6-pxa1-hh36/kernel/net/bluetooth/l2cap.o
> BlueZ L2CAP ver 2.3 Copyright (C) 2000,2001 Qualcomm Inc
> Written 2000,2001 by Maxim Krasnyansky <maxk@qualcomm.com>
> bnep Using
> /lib/modules/2.4.19-rmk6-pxa1-hh36/kernel/net/bluetooth/bnep/bnep.o
> BlueZ BNEP ver 1.1
> Copyright (C) 2001,2002 Inventel Systemes
> Written 2001,2002 by Clement Moreau <clement.moreau@inventel.fr>
> Written 2001,2002 by David Libault <david.libault@inventel.fr>
> Copyright (C) 2002 Maxim Krasnyanskiy <maxk@qualcomm.com>
> bluez modprobe: failed to load module bluez
> apm Using /lib/modules/2.4.19-rmk6-pxa1-hh36/kernel/arch/arm/mach-pxa/apm.o
> apm: BIOS version 1.2 Flags 0x02 (Driver version 1.13)
> h3600_ts Using
> /lib/modules/2.4.19-rmk6-pxa1-hh36/kernel/drivers/char/h3600_tso
> h3600_ts_init_module: registering char device
> ipv6 Using /lib/modules/2.4.19-rmk6-pxa1-hh36/kernel/net/ipv6/ipv6.o
> IPv6 v0.8 for NET4.0
> IPv6 over IPv4 tunneling driver
> ircomm-tty Using /lib/modules/2.4.19-rmk6-pxa1-hh36/kernel/net/irda/irda.o
> Using /lib/modules/2.4.19-rmk6-pxa1-hh36/kernel/net/irda/ircomm/ircomm.o
> IrCOMM protocol (Dag Brattli)
> Using /lib/modules/2.4.19-rmk6-pxa1-hh36/kernel/net/irda/ircomm/ircomm-tty.o
> ipaq-sleeve Using
> /lib/modules/2.4.19-rmk6-pxa1-hh36/kernel/arch/arm/mach-ipaqo
> h5400_control_egpio: card_reset: setp=0
> opt_on: gpa=f30c0008 setp=0
> opt_nvram_n: before gplr=1c1cc9a setp=0
> opt_nvram_n: after gplr=c1cc9a setp=0
> sa1100-rtc Using
> /lib/modules/2.4.19-rmk6-pxa1-hh36/kernel/drivers/char/sa1100o
> SA1100 Real Time Clock driver v1.03
> usb-eth opt_nvram_n: before gplr=1c1cc9a setp=0
> opt_nvram_n: after gplr=1c1cc9a setp=0
> Using
> /lib/modules/2.4.19-rmk6-pxa1-hh36/kernel/arch/arm/mach-pxa/pxausb_core.o
> soft_connect_hook: enable=0 GPDR=1ebfb GPLR=1c1cc9a GAFR=a0000000
> PXA USB Controller Core Initialized
> Using /lib/modules/2.4.19-rmk6-pxa1-hh36/kernel/arch/arm/mach-pxa/usb-eth.o
> usbctl: usb-eth registered.
> soft_connect_hook: enable=1 GPDR=1ebff GPLR=1c1cc9e GAFR=a0000000
> USB Function Ethernet Driver Interface
> h5400_buzzer Using
> /lib/modules/2.4.19-rmk6-pxa1-hh36/kernel/drivers/char/h540o
> usb-ohci-h5400 usb-eth: device configured, go go go.
> Using
> /lib/modules/2.4.19-rmk6-pxa1-hh36/kernel/arch/arm/mach-pxa/pcipool-h540o
> pcipool_h5400_init: page->vaddr=cca0c000 page->dma=14000000 blocks_per_page=8
> 4
> Using
> /lib/modules/2.4.19-rmk6-pxa1-hh36/kernel/arch/arm/mach-pxa/h5400-pcibufo
> Using /lib/modules/2.4.19-rmk6-pxa1-hh36/kernel/drivers/usb/usb-ohci.o
> Using /lib/modules/2.4.19-rmk6-pxa1-hh36/kernel/drivers/usb/usb-ohci-h5400.o
> _______________________________________________
> The Familiar Linux Distribution
> Familiar mailing list
> Familiar@handhelds.org
> https://handhelds.org/mailman/listinfo/familiar
> irc://irc.freenode.net #familiar
>
>



[prev in list] [next in list] [prev in thread] [next in thread]