[prev in list] [next in list] [prev in thread] [next in thread]
List: familiar
Subject: RE: [Familiar] Reparitioning for bootldr?
From: "Linux Guy" <linuxguy () consultant ! com>
Date: 2001-11-28 19:28:32
Message-ID: 20011128192833.19604.qmail () mail ! com
[Download RAW message or body]
Thanks. I had hoped that it was that simple.
I'll move the other partitions up respectively as well --- not a problem.
-----Original Message-----
From: "Hicks, Jamey" <Jamey.Hicks@compaq.com>
Date: Wed, 28 Nov 2001 13:19:12 -0500
To: "Linux Guy" <linuxguy@consultant.com>, <familiar@handhelds.org>
Subject: RE: [Familiar] Reparitioning for bootldr?
>
> The following will enable you to update the bootldr:
>
> partition define bootldr 0x0 0x40000 2
> load bootldr
> reset
>
> **Do not do a 'params save' or 'partition save' until the new bootldr is
> running**
>
> Jamey
>
> > -----Original Message-----
> > From: Linux Guy [mailto:linuxguy@consultant.com]
> > Sent: Wednesday, November 28, 2001 12:52 PM
> > To: familiar@handhelds.org
> > Subject: [Familiar] Reparitioning for bootldr?
> >
> >
> > Before I brick my iPaq 3150...
> >
> > I need to move some partitions around to make
> > "room" for the 2.16.19 bootloader. Right now if I try to
> > upgrade the bootloader, it won't "take" because the bootlrd
> > partition is only
> > 131072, whereas the 2.16.19 image is 144k.
> >
> >
> > Is there a safe way to repartition the system at the boot>
> > prompt without trashing the ability to load the new
> > bootloader? I assume yes, but I'm not willing to bet a brick
> > on the answer.
> >
> > Currently, my partitions are laid out as follows:
> > boot> partition show
> > argv[1]=partition
> > npartitions=00000004
> > bootldr
> > base: 00000000
> > size: 00020000
> > flags: 00000002
> > params
> > base: 00020000
> > size: 00020000
> > flags: 00000000
> > kernel
> > base: 00080000
> > size: 000C0000
> > flags: 00000000
> > root
> > base: 00140000
> > size: 00EC0000
> > flags: 00000018
> >
> >
> > ADVthanksANCE
> > --
> >
> >
> > -o)
> > /\e\e
> > _\e_V
> > Message void if penguin violated ... Don't mess with the penguin
> >
> >
> >
> > _______________________________________________
> > Sign-up for your own FREE Personalized E-mail at Mail.com
> > http://www.mail.com/?sr=signup
> >
> >
> > 1 cent a minute calls anywhere in the U.S.!
> >
> > http://www.getpennytalk.com/cgi-bin/adforward.cgi?p_key=RG9853
> KJ&url=http://www.getpennytalk.com
>
>
> _______________________________________________
> Familiar mailing list
> Familiar@handhelds.org
> http://handhelds.org/mailman/listinfo/familiar
> irc://irc.openprojects.net #familiar
>
> _______________________________________________
> Familiar mailing list
> Familiar@handhelds.org
> http://handhelds.org/mailman/listinfo/familiar
> irc://irc.openprojects.net #familiar
>
>
--
-o)
/\e\e
_\e_V
Message void if penguin violated ... Don't mess with the penguin
_______________________________________________
Sign-up for your own FREE Personalized E-mail at Mail.com
http://www.mail.com/?sr=signup
1 cent a minute calls anywhere in the U.S.!
http://www.getpennytalk.com/cgi-bin/adforward.cgi?p_key=RG9853KJ&url=http://www.getpennytalk.com
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic