[prev in list] [next in list] [prev in thread] [next in thread]
List: elecraft
Subject: Re: [Elecraft] KAT500/KPA500 issue
From: "Kidder, George" <gkidder () ilstu ! edu>
Date: 2019-01-27 15:14:17
Message-ID: 39ca2085-ffe7-dbc9-f168-1db44098684a () ilstu ! edu
[Download RAW message or body]
I have had the coax connector between the ladder line and the coax arc
over with high power on 75. Might check that.
George, W3HBM
On 1/27/2019 8:49 AM, Dave wrote:
> Also check the ladder line at the ends for possible breaks.
>
> I had one of the "optimized" G5RV antennas sold by W8AMZ which used solid wire in \
> the ladder line. Due to flexing in the wind the wire broke where it entered the \
> epoxyed pvc end cap (SO-239 connector) the plastic jacketing was still in place so \
> the wire would be fine under 20 watts tune but would arc under high power.
> The fix was to rebuild the antenna using copper clad stranded ladder line.
>
> Dave wo2x
>
> Sent from my iPad
>
> > On Jan 27, 2019, at 8:28 AM, Jack Satterfield <jack@satterfield.org> wrote:
> >
> > Michael..good suggestion, will do later when the rain stops.
> >
> > Thanks,
> >
> > Jack
> >
> > W4GRJ
> >
> >
> >
> > From: Michael Blake [mailto:k9jri@mac.com]
> > Sent: Sunday, January 27, 2019 8:17 AM
> > To: Jack Satterfield
> > Cc: Elecraft Reflector
> > Subject: Re: [Elecraft] KAT500/KPA500 issue
> >
> >
> >
> > Jack, I had a similar thing happen and it turned out to be a tree branch had
> > grown into the antenna path and when on high power the antenna was arcing to
> > the tree branch. Might not be a tree branch but look for any signs of
> > possible arching in the antenna, feed line or connectors.
> >
> >
> >
> > 73 - Mike - K9JRI
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > On Jan 27, 2019, at 8:10 AM, Jack Satterfield <jack@satterfield.org> wrote:
> >
> >
> >
> > After 5 years of perfect operation, now a very strange issue
> >
> > Bypass SWR 3 or 4:1
> >
> > KAT500 tunes to 1.3:1
> >
> > Switch amp to operate, operating SBB on first voice KAT500 goes full scale
> > swr and amp faults on high swr
> >
> > Never had a issue before, antenna is g5rv
> >
> > Any ideas appreciated.
> >
> > Jack
> >
> > W4GRJ
> >
> >
> >
> > ______________________________________________________________
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft@mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to k9jri@mac.com
> >
> >
> >
> > ______________________________________________________________
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft@mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to rocketnj@gmail.com
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to gkidder@ilstu.edu
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to elecraft@progressive-comp.com
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic