[prev in list] [next in list] [prev in thread] [next in thread]
List: elecraft
Subject: Re: [Elecraft] Elecraft K3 lock power control
From: Bob McGraw K4TAX <rmcgraw () blomand ! net>
Date: 2017-08-30 16:42:30
Message-ID: D02F2338-1F44-419E-84CC-5AA870BC57A4 () blomand ! net
[Download RAW message or body]
I've not used ALC from the amp to control the transceiver power in years. Just set \
the transceiver power to the required power during tune up of the amp and let the \
superior transceiver ALC do its job. This greatly prevents ALC overshoot.
Bob, K4TAX
Sent from my iPhone
> On Aug 30, 2017, at 10:33 AM, 2EØLDZ <ldz@chopcat.co.uk> wrote:
>
> Thanks Keith
>
> Yes. I have been using the lock function to date. And will carry on in that way.
>
> The issue of what I am trying to do comes up as we are using an amplifier that is \
> not compatible with the ALC control on the K3S therefore the need to minimise the \
> risk of overdriving. It would be nice to have some flexibility in that for less \
> experienced users (especially as it is my radio I am lending to the club!) so that \
> they can experiment with the power levels up to a set limit, without me risking my \
> radio.
> I fully appreciate that if this were in a KX500 setup none of this would be \
> necessary but maybe it could be considered in a future iteration of the software.
> cheers for the response.
> Trevor Clapp
> M6LDZ
> 2E0LDZ
> LDZ@chopcat.co.uk <mailto:LDZ@chopcat.co.uk>
>
> RADIO BLOG <http://chopcat.co.uk/page1/blog/index.html>
>
> 07900 49 77 11
>
>
>
> On 30 Aug 2017, at 16:21, Keith Trinity WE6R <keith@elecraft.com \
> <mailto:keith@elecraft.com>> wrote:
> Hi Trevor; I saw your post. This has baffled me when a radio comes in for repair \
> and is LOCKED. You can use it for your club operations to lock the power control. \
> Unfortunately, they cannot go LOWER in power either. (the word LOCKED is NOT in \
> the manual, so hard to find this). (We can set the max power here at the factory \
> but it would require a trip here and back here to un-do the limit- Japan has a 50W \
> mobile limit).
> LOCKED shows in the display when attempting to set pwr power mic comp compression \
> controls. FiX; Tap 1 in "PWR SET" menu.
> Tap 1 to LOCK or UNLOCK the MIC, CMP, and PWR controls.
>
> PWR SET NOR If set to NOR, the power level on each band follows the present setting \
> of the PWR control. If set to PER-BAND, the power level is saved on each band. This
> is especially useful with external amplifiers (see ALC discussion on page 82.)
> If a KPA500 is connected to the K3S via the ACC cable, two sets of per-band
> power settings are saved: one for "barefoot" operation, one for use with the amp.
> When the amp is used, an asterisk appears as PWR is rotated (e.g. 30 W*).
>
>
>
>
>
> Trevor Clapp
> M6LDZ
> 2E0LDZ
> LDZ@chopcat.co.uk <mailto:LDZ@chopcat.co.uk>
>
> RADIO BLOG <http://chopcat.co.uk/page1/blog/index.html>
>
> 07900 49 77 11
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to rmcgraw@blomand.net
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to elecraft@progressive-comp.com
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic