[prev in list] [next in list] [prev in thread] [next in thread] 

List:       elecraft
Subject:    Re: [Elecraft] K3S and Acom 2000A
From:       "Joe Subich, W4TV" <lists () subich ! com>
Date:       2016-04-29 19:12:35
Message-ID: 32926ace-29ee-6721-dd27-a6e616051538 () subich ! com
[Download RAW message or body]


On 4/29/2016 10:13 AM, john@kk9a.com wrote:
> Does anyone manufacture a commercial "x" cable?  I have a MicroHAM device,
> a band decoder and a KPA500/KAT500 that all need the ACC. So far have not
> tried connecting all three with two "Y" cables.

They work fine using the Elecraft Y cables or you can make your own
break out cable that routs the Band Data, Key Out and Aux Bus signals
to the KPA500/KAT500 with the FSK and PTT (key In) pins going to the
microHAM Device.

> BTW, I have used an Acom 2000a with a K3S and it worked great just using
> the RCA relay cable.

I'm sure Tom is looking for the CAT data (from the RS-232 port) since
that is what the Acom 2000 needs - not "Band Data" (BCD).  That's a
more difficult configuration and would require access to the equipment
to experiment/validate a configuration.  One would expect Acom to be
able to provide the necessary information/support.

73,

   ... Joe, W4TV


>
> John KK9A
>
> from: Val
> Fri Apr 29 01:31:51 EDT 2016
>
> Tom,
>
> I am still on K3, but there should be no difference. ACOM 2000A needs
> a Y cable too. Or instead of two Y cables make a X cable :). If you
> have alredy tried this but not satisfied, just write me directly.
>
> 73, Val LZ1VB
>
>
>
>> I have two K3S connected to two Acom 200A. I am using the USB
>> interface to
>> the computer and running Writelog and Wintest. The P3's are
>> connected via
>> the special Y cable on the RS232 interface.
>>
>> Has anyone successfully managed to control the Acom 2000A with the
>> K3S?
>> Please share!
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to elecraft@progressive-comp.com
[prev in list] [next in list] [prev in thread] [next in thread]