[prev in list] [next in list] [prev in thread] [next in thread]
List: elecraft
Subject: [Elecraft] K3 no xmit, no receive?
From: James Wilson <w4rks73 () gmail ! com>
Date: 2015-05-30 15:34:31
Message-ID: CAJNRSCbgeKY8o8t1QpdNgda9LLnBwYHYvPqRWy09ZzMyTxEfCg () mail ! gmail ! com
[Download RAW message or body]
Tom,
Since you receive white noise, before you dive into
the K3, consider that there is an item that is common
to all three antenna inputs. - The BNC connector
and coax to the BudiPole.
Try another independent antenna into the antenna
input you have active. Just a few feet of wire as an
antenna will give you some signal reception.
Then try transmitting into a dummy load using a
completely different coax and connector.
Just suggestions.
73, Jim Wilson
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to elecraft@progressive-comp.com
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic