[prev in list] [next in list] [prev in thread] [next in thread]
List: elecraft
Subject: Re: [Elecraft] Any larger or more efficient heatsinks available for the K2/100PA (radio lid/top)
From: "David Cutter" <d.cutter () ntlworld ! com>
Date: 2014-09-28 22:50:38
Message-ID: 59128C8C343E4E118658EE4133F9F128 () toshibauser
[Download RAW message or body]
You could try 2 x 12V fans in series to give a bigger cooling area but
smaller current; I did this once on a noise-critical application.
In terms of S units at the other end, turning down the power, say 25% makes
sense.
David
G3UNA
> I run a 4" (120mm) computer case fan that the specs say draws all of .15
> amps, 1.8 watts @ 12V, at full speed.
> It probably doesn't need to turn that fast to adequately cool the heat
> sink so the current draw could be much less.
> .15A or less current draw for a fan is insignificant, IMO, compared to the
> 20A the rig draws on transmit.
> If you want to save some battery turn the power down or decrease the duty
> cycle.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to elecraft@progressive-comp.com
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic