[prev in list] [next in list] [prev in thread] [next in thread]
List: elecraft
Subject: [Elecraft] KXPA100 firmware rev 1.25 now available -- works well with external antenna tuners
From: Wayne Burdick <n6kr () elecraft ! com>
Date: 2014-03-31 22:51:45
Message-ID: 07714A6C-1064-4173-A04D-9ACC125600F4 () elecraft ! com
[Download RAW message or body]
The latest KXPA100 beta firmware, rev. 1.25, significant improves the amplifier's \
behavior when used with external antenna tuners. Many high-power tuners, including \
the KAT500, work best with 10-20 W of RF. You can now use the KXPA100 in this range, \
since it is more tolerant of the forward- and reflected-power overshoots that often \
occur during antenna tuning.
There's another notable improvement: When the attenuator is inserted because of SWR \
or high reflected power, it will be released immediately on the next key up if SWR \
has been reduced to 3:1 or better.
Please refer to our KXPA100 firmware page for further details:
http://www.elecraft.com/KXPA100/KXPA100_software.htm
73,
Wayne
N6KR
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to elecraft@progressive-comp.com
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic