[prev in list] [next in list] [prev in thread] [next in thread]
List: elecraft
Subject: [Elecraft] [K3] Strange transverter power out issue
From: Robert Chipperfield <robert () syxis ! co ! uk>
Date: 2013-10-29 21:14:17
Message-ID: CA+oHu3oSkBW-ErVEo3Ejy3HjWs=s_XqWVAkTipLSqzzzvd43_g () mail ! gmail ! com
[Download RAW message or body]
Hi all,
I'm seeing a rather strange phenomenon with the K3's transverter output
this evening. I'm using it to drive an OZ2M 70MHz transverter.
If I set up the drive level for the desired 40W out (after the 70MHz PA),
it needs about -12dB according to the K3.
After a few minutes' of TX, the power out is substantially reduced - but
here's the strange bit. If I now twiddle the power knob clockwise, the
display still indicates -12dB, but the actual power out increases back to
the original setting! Similarly if I go into the config menu, and change
the transverter drive down to 0.04 and back to 0.05, full power is restored.
This pattern continues - a gradual decline in TX power, restored by a quick
twiddle of the TX power out to get it back up, then a gradual decline again.
Any thoughts very much appreciated!
(Unfortunately I don't have a mW-level power meter so I can't easily verify
the IF power out, but the fact that twiddling a knob that doesn't have a
displayed effect on the K3 makes me suspicious it's at the rig end...)
73,
Rob, M0VFC
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic