[prev in list] [next in list] [prev in thread] [next in thread] 

List:       elecraft
Subject:    Re: [Elecraft] Energizer L91 batteries for the K1-4
From:       Don Wilhelm <w3fpr () embarqmail ! com>
Date:       2011-09-29 20:00:48
Message-ID: 4E84CE70.1020604 () embarqmail ! com
[Download RAW message or body]

Stephen,

I repaired one K1 that had a similar "problem".
If one inserts the battery holder with the battery bodies parallel with 
the front panel, yes. the spring leads on the battery pack will be 
shorted by the aluminum bracket.
Put the battery pack in the way it is shown on page 7 of the KBT1 manual 
- the length of the batteries are parallel with the side panel.

That same thing can happen with any type battery.

73,
Don W3FPR

On 9/29/2011 2:20 PM, Stephen Prior wrote:
> Bob
>
> I fitted them into my K1 and found that they caused shorting somewhere - I
> never established quite where as I was too eager to remove them when they
> got very hot.  I have compared the size of the cells with alkaline by eye
> and can see no difference in diameter but the springs in the battery box
> seemed more compressed with the Energizers and I think that one spring was
> touching the aluminium bracket.  I have covered the bracket with clear tape
> now but haven't put the Energizers back in yet.  Since Wayne uses them, I
> shall do just that and try again.  I used them in my KX1 with no issues for
> several years.
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
[prev in list] [next in list] [prev in thread] [next in thread]