[prev in list] [next in list] [prev in thread] [next in thread]
List: elecraft
Subject: Re: [Elecraft] [K3] - FLDIGI - Signalink
From: John Ragle <tpcj1r03 () crocker ! com>
Date: 2010-12-31 2:31:48
Message-ID: 4D1D4094.8000203 () crocker ! com
[Download RAW message or body]
Paul...
Good session on gotomeeting this afternoon...I found it quite
instructive. Here is what Don W. wrote me some time ago:
On 7/17/2010 6:44 PM, Don Wilhelm wrote:
> "...Use the power knob to set the power you wish to use, and increase
> the audio drive until you get 4 to 5 bars on the "ALC" meter. If you
> are using the Line In on the K3, you will have to change the
> Signallink to the high audio output, the default low setting is mic
> level (because most transceivers use mic level for data as well as
> voice). That will provide stable operation of the K3 power control
> circuits."
Call again if you need more help. I use a similar combination on my ICOM
910H for WSJT on 2 meters (not much PSK there, in part because of
multipath propagation and in part because it is not the "fashion").
You really ought to have a look at the WSJT pages (google WSJT)...not
too much doing just at the moment wrt meteor scatter, though I heard a
couple of stations today. Peaking on the evening of January 3 will be
the "quadrantids" shower (google again), which should give lively MS
activity. The K3 works beautifully on 6 meters in this (FSK441) mode
with the SignaLink box, though you will have to increase the LIN OUT
setting on the K3 (don't use the digital gain on SpecJT to accomplish
this). Your K3 at 100 watts should work well.
You will also find Europeans (mostly) working PSK63 and higher speed
modes, usually keeping to the region around 14.073 or so.
Also, your K3 will work marvelously in the other modes available in
FLDIGI -- e.g. olivia, hell, etc. -- though in my experience there is
not as much activity.
I look forward to working you "over the air"
John Ragle -- W1ZI
=====
On 12/30/2010 3:32 PM, Paul@N4LCD.com wrote:
> I'm brand new to digital modes (other than CW, and packet from the 80's).
>
> Is anyone up to helping me get the K3 configured with FLDIGI and Signalink?
>
> FLDIGI can receive fine.
>
> FLDIGI can transmit according to my in-line power meter, with the
> power set to 25 Watts, but nobody can hear me.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic