[prev in list] [next in list] [prev in thread] [next in thread]
List: ecos-devel
Subject: Re: why only this address in pci
From: David Vrabel <dvrabel () arcom ! com>
Date: 2006-03-02 12:19:13
Message-ID: 4406E2C1.9080601 () arcom ! com
[Download RAW message or body]
sumanth wrote:
> Hi all,
>
> We are porting ecos for ixp425 evalution board, we are using
> the grg
> for the purpose ,
> now we are able to go up to plf_hardware_init
>
> we are strucking up at cyg_hal_plf_pci_init
>
> in pci it is using this address are there any specific reasons
>
> *IXP425_PCI_PCIMEMBASE = 0x48494A4B
> *IXP425_PCI_AHBMEMBASE = 0x00010203
This values ensure that the AHB addresses are the same as the PCI bus
addresses. You don't want to change them.
David Vrabel
--
David Vrabel, Design Engineer
Arcom, Clifton Road Tel: +44 (0)1223 411200 ext. 3233
Cambridge CB1 7EA, UK Web: http://www.arcom.com/
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic