[prev in list] [next in list] [prev in thread] [next in thread]
List: e1000-devel
Subject: Re: [E1000-devel] burn ipxe to card
From: "Fujinaka, Todd" <todd.fujinaka () intel ! com>
Date: 2014-02-26 18:32:13
Message-ID: 9B4A1B1917080E46B64F07F2989DADD65293CA52 () ORSMSX102 ! amr ! corp ! intel ! com
[Download RAW message or body]
I think you need to ask the iPXE guys these questions, not us.
Todd Fujinaka
Software Application Engineer
Networking Division (ND)
Intel Corporation
todd.fujinaka@intel.com
(503) 712-4565
-----Original Message-----
From: vase@selfip.ru [mailto:vase@selfip.ru] On Behalf Of Vasiliy Tolstov
Sent: Wednesday, February 26, 2014 7:55 AM
To: Fujinaka, Todd
Cc: e1000-devel@lists.sourceforge.net
Subject: Re: [E1000-devel] burn ipxe to card
2014-02-26 19:50 GMT+04:00 Fujinaka, Todd <todd.fujinaka@intel.com>:
> The PXE spec does not support IPv6. The only way you might be able to get this \
> going is with uEFI, and we don't do the uEFI drivers. You'll have to contact the \
> uEFI folks.
Okay, but ipxe can use ipv6 slaac address when boots, is that possible to reflash my \
intel pxe code with ipxe and not burn it?
--
Vasiliy Tolstov,
e-mail: v.tolstov@selfip.ru
jabber: vase@selfip.ru
------------------------------------------------------------------------------
Flow-based real-time traffic analytics software. Cisco certified tool.
Monitor traffic, SLAs, QoS, Medianet, WAAS etc. with NetFlow Analyzer
Customize your own dashboards, set traffic alerts and generate reports.
Network behavioral analysis & security monitoring. All-in-one tool.
http://pubads.g.doubleclick.net/gampad/clk?id=126839071&iu=/4140/ostg.clktrk
_______________________________________________
E1000-devel mailing list
E1000-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/e1000-devel
To learn more about Intel® Ethernet, visit \
http://communities.intel.com/community/wired
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic