'[Dri-users] Re: [XFree86] is DRI worlking for ATI rage pro mach64 ?'

[prev in list] [next in list] [prev in thread] [next in thread] 

List:       dri-users
Subject:    [Dri-users] Re: [XFree86] is DRI worlking for ATI rage pro mach64 ?
From:       Philippe Moutarlier <philippe.moutarlier () attbi ! com>
Date:       2003-04-30 5:29:34
[Download RAW message or body]

Thanks !

I'll try it. I would love to see those "old" laptop cards 
3d accelerated !

Philippe

On Tue, 2003-04-29 at 18:36, Leif Delgass wrote:
> I'm cc:ing the dri-users mailing list, please reply to that list if you 
> have questions...
> 
> You need to have a working install of XFree86 4.3.0 first.  Then you have 
> two options:
> 
> 1. Try the binary snapshots (Linux x86 only) at:
> http://dri.sourceforge.net/snapshots/bleeding-edge/
> 
> Download, unpack, exit X, become root, run ./install.sh.  You'll need
> kernel sources installed to build the kernel module -- note that kernel
> headers are not enough, you need a full tree.  The build is done by the
> install script, but you'll need the sources installed first.
> 
> 2. Check out DRI cvs with the 'mach64-0-0-6-branch' branch tag.  Build and 
> install.  See:
> 
> http://dri.sourceforge.net/doc/DRIcompile.html
> 
> To get the branch, use 'co -r mach64-0-0-6-branch xc' instead of 
> 'co xc' for the CVS checkout command.
> 
> --Leif
> 
> On 29 Apr 2003, Philippe Moutarlier wrote:
> 
> > Is there a way to retrieve this branch and give it a shot or is the
> > integration less than obvious ?
> > 
> > Thanks,
> > 
> > Philippe
> >  
> > On Tue, 2003-04-29 at 16:33, Marc Aurele La France wrote:
> > > On 28 Apr 2003, Philippe Moutarlier wrote:
> > > 
> > > > a while ago it 3D accel used to work with the old utah-glx code.
> > > > It was not there in early stages of the new DRI architecture.
> > > > Is it there now (I don't seem to be able to get it to work though...).
> > > > It is just that all my laptops seem to just have this one only card :-)
> > > 
> > > There's a branch for this in the DRI tree which has yet to be integrated
> > > into XFree86's CVS.
> > > 
> > > Marc.
> > > 
> > > +----------------------------------+-----------------------------------+
> > > |  Marc Aurele La France           |  work:   1-780-492-9310           |
> > > |  Computing and Network Services  |  fax:    1-780-492-1729           |
> > > |  352 General Services Building   |  email:  tsi@ualberta.ca          |
> > > |  University of Alberta           +-----------------------------------+
> > > |  Edmonton, Alberta               |                                   |
> > > |  T6G 2H1                         |     Standard disclaimers apply    |
> > > |  CANADA                          |                                   |
> > > +----------------------------------+-----------------------------------+
> > > XFree86 Core Team member.  ATI driver and X server internals.
> > > 
> > > _______________________________________________
> > > XFree86 mailing list
> > > XFree86@XFree86.Org
> > > http://XFree86.Org/mailman/listinfo/xfree86
> > 
-- 
Philippe Moutarlier <philippe.moutarlier@attbi.com>

-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_______________________________________________
Dri-users mailing list
Dri-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/dri-users
[prev in list] [next in list] [prev in thread] [next in thread] 