[prev in list] [next in list] [prev in thread] [next in thread]
List: drbd-user
Subject: Re: [DRBD-user] satellite daemon must non-3377 port for SSL?
From: Robert Altnoeder <robert.altnoeder () linbit ! com>
Date: 2020-07-02 20:29:00
Message-ID: BF723E5F-0A7B-49D4-8D27-4E409B16AAC0 () linbit ! com
[Download RAW message or body]
> On 25 Jun 2020, at 23:03, Chad William Seys <cwseys@physics.wisc.edu> wrote:
>
> Hi,
> I have a "Combined" controller/satellite node which I'm trying to set
> up SSL on.
> It appears that the controller binds port 3377 by default. This is also the port \
> the satellite listens to by default. When the node is Combined, this causes \
> problems connecting to the satellite daemon.
As Rene already quoted from the source code, by default, the controller listens on \
3376 (plain) and 3377 (ssl), while the satellite listens on 3366 (plain) and 3367 \
(ssl).
The controller's so-called connectors are configured in its database as property \
values, in netcom/<ConnectorName>. Each connector has a port property that can be \
changed. Either use the LINSTOR client to change that property, e.g. \
netcom/SslConnector/port for the SSL connector that is configured by default, or if \
that does not work for whatever reason, start the controller interactively with the \
debug console (-D) and enter: SetCfgVal namespace(netcom) key(SslConnector/port) \
value(xxx) where xxx is the port number you want to set.
Then restart the controller (enter ShtDwn and restart as usual with \
Pacemaker/systemctl/start script/etc.)
Anyhow, that should not be necessary, because the controller and satellite modules \
were designed to run on the same node without causing TCP port collisions.
br,
Robert
_______________________________________________
Star us on GITHUB: https://github.com/LINBIT
drbd-user mailing list
drbd-user@lists.linbit.com
https://lists.linbit.com/mailman/listinfo/drbd-user
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic