[prev in list] [next in list] [prev in thread] [next in thread]
List: drbd-user
Subject: Re: [DRBD-user] Ip problems since changes
From: Dieter Hermanns <dh () fraenz-jaeger ! de>
Date: 2008-11-20 12:48:58
Message-ID: 49255CBA.5010501 () fraenz-jaeger ! de
[Download RAW message or body]
yoyo64 schrieb:
>
> Thanks a lot for your help
>
> My eth0: and eth0:0 Ip adresses are mandatory, so I expect to change only
> eth1: as below
> SVR1:
> inet adr:10.100.1.21 Masque:255.255.248.0
> SVR2:
> inet adr:10.100.1.22 Masque:255.255.248.0
> I found that despite there are on same mask, they are not on same subnet
> (see exemples on internet)
>
> - What do you think about this configuration ?
>
> Add to this, my eth1: are used for drbd purpose (see my drbd.conf below)
>
> - Can I change without any damage for datas, IP's adress ?
>
there was a misunderstanding!
I meant your eth1 mask not the eth0 ones.
inet adr:10.64.100.118 Bcast:10.64.100.255 Masque:255.255.128.0
^^^ ^^^
either this must be 127 -------------+ |
|
or this must be 255 ----------------------------------------+
on your 15bit netmask, your broadcast adress must have set all 15 lower bits!
--
Dieter Hermanns Telefon: +49(0)241 910508 0
Fränz & Jaeger GmbH Telefax: +49(0)241 910508 40
Schurzelter Str. 27 Email : dh@fraenz-jaeger.de
52074 Aachen Web : www.fraenz-jaeger.de
GF: Dipl.Phys. Thomas Fränz USt.-Ident Nr.: DE220975410
Dipl.-Ing. Dieter Jaeger Amtsgericht Aachen HRB 8785
_______________________________________________
drbd-user mailing list
drbd-user@lists.linbit.com
http://lists.linbit.com/mailman/listinfo/drbd-user
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic