[prev in list] [next in list] [prev in thread] [next in thread]
List: drbd-user
Subject: [DRBD-user] Re: acl support with drbd - revisited
From: john little <jslittl () hendricks ! org>
Date: 2004-10-25 18:03:01
Message-ID: 417D3FD5.3030204 () hendricks ! org
[Download RAW message or body]
> From: Lars Ellenberg <Lars.Ellenberg@linbit.com>
> Subject: Re: [DRBD-user] Re: acl support with drbd - revisited
> To: drbd-user@lists.linbit.com
> Message-ID: <XyTdHZWLIfklPjXidlp9fyg=lge@web.de>
> Content-Type: text/plain; charset=us-ascii
>
> / 2004-10-23 13:52:17 -0500
> \ john little:
>
>>>Hello all,
>>>
>>>I am attempting to use acl support with drbd. So far I haven't been
>>>able to get the acl's to failover properly. (At least I think that's the
>>>problem-if there is some other reason that you know of please let me
>>
>>know).
>>
>>>Setup:
>>>2 x SLES 8 Servers
>>>2 x drbd version: 0.7.4, setup with heartbeat to start smb, nmb, winbind
>>
>>Hello all!
>>
>>I previously wrote the above post and received several good ideas which
>>I have implemented-or attempted to.
>>
>>One of these was to go to SLES 9 which I did. I also went with
>>reiserfs. I can't seem to get the syntax correct in the haresources
>>file for drbd to mount the devices with acls. My syntax:
>>fp3la 128.1.245.240/16 drbddisk::drbd0
>>Filesystem::/dev/nb0::/www::reiserfs::rw::acl::user_xattr.
>
>
> of course needs to be one line, or the first ending in \
Yes of course :)
>
> and it should read
> Filesystem::/dev/nb0::/www::reiserfs::rw,acl,user_xattr
Ok that did it. Thanks for your help.
John
>
> which will translate to
> mount -t reiserfs -o rw,acl,user_xattr /dev/nb0 /www
>
>
> Lars Ellenberg
>
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic