[prev in list] [next in list] [prev in thread] [next in thread]
List: dragonfly-users
Subject: Re: Install DragonFlyBSD on 48 MB RAM
From: Chris Turner <c.turner () 199technologies ! com>
Date: 2012-02-27 22:32:58
Message-ID: 4F4C049A.3070409 () 199technologies ! com
[Download RAW message or body]
On 02/27/12 11:10, v_2e@ukr.net wrote:
> Now when I try to run 'installer', it shows me a blue screen with a
> dragonfly, but after a couple of seconds it vanishes and gives me the
> following message:
Perhaps someone can chime in with an installer tip - However, given
this is a non standard and sort of 'expert' install, you might review
the 'INSTALL' file under / from the shell and try a manual install -
its actually fairly straightforward - steps being roughly:
- partition disks
- install bootloader
- create & mount filesystems
- copy over files
- remove some installer specific files from the copies
- reboot
disclaimer: some of the disklabel / partitioning stuff is a bit out
of date w/r/t disklabel64 / slice numbers, etc. I keep meaning
to send a patch.. but anyhow.
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic