[prev in list] [next in list] [prev in thread] [next in thread]
List: dmaengine
Subject: Re: [PATCH 1/2] dmaengine: zxdma: Fix data width bug
From: Jun Nie <jun.nie () linaro ! org>
Date: 2015-07-29 6:10:02
Message-ID: CABymUCOnnEcovVHLKajHo1gbpakcW1yP-J-1Oy07Zm-sjbRq8g () mail ! gmail ! com
[Download RAW message or body]
2015-07-21 11:02 GMT+08:00 Jun Nie <jun.nie@linaro.org>:
> 2015-07-21 11:01 GMT+08:00 Jun Nie <jun.nie@linaro.org>:
>> Align src and dst width to fix data alignment issue. Hardware
>> burst length limitation can be addressed well too.
>>
>> Signed-off-by: Jun Nie <jun.nie@linaro.org>
>> ---
>> drivers/dma/zx296702_dma.c | 8 ++++----
>> 1 file changed, 4 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/dma/zx296702_dma.c b/drivers/dma/zx296702_dma.c
>> index ec470bc..4757f74 100644
>> --- a/drivers/dma/zx296702_dma.c
>> +++ b/drivers/dma/zx296702_dma.c
>> @@ -143,6 +143,7 @@ static void zx_dma_terminate_chan(struct zx_dma_phy *phy, struct zx_dma_dev *d)
>>
>> val = readl_relaxed(phy->base + REG_ZX_CTRL);
>> val &= ~ZX_CH_ENABLE;
>> + val |= ZX_FORCE_CLOSE;
>> writel_relaxed(val, phy->base + REG_ZX_CTRL);
>>
>> val = 0x1 << phy->idx;
>> @@ -475,13 +476,12 @@ static int zx_pre_config(struct zx_dma_chan *c, enum dma_transfer_direction dir)
>> * We need make sure dst len not exceed MAX LEN.
>> */
>> dst_width = zx_dma_burst_width(cfg->dst_addr_width);
>> - maxburst = cfg->dst_maxburst * cfg->dst_addr_width
>> - / DMA_SLAVE_BUSWIDTH_8_BYTES;
>> + maxburst = cfg->dst_maxburst;
>> maxburst = maxburst < ZX_MAX_BURST_LEN ?
>> maxburst : ZX_MAX_BURST_LEN;
>> c->ccfg = ZX_DST_FIFO_MODE | ZX_CH_ENABLE
>> | ZX_SRC_BURST_LEN(maxburst - 1)
>> - | ZX_SRC_BURST_WIDTH(ZX_DMA_WIDTH_64BIT)
>> + | ZX_SRC_BURST_WIDTH(dst_width)
>> | ZX_DST_BURST_WIDTH(dst_width);
>> break;
>> case DMA_DEV_TO_MEM:
>> @@ -493,7 +493,7 @@ static int zx_pre_config(struct zx_dma_chan *c, enum dma_transfer_direction dir)
>> c->ccfg = ZX_SRC_FIFO_MODE | ZX_CH_ENABLE
>> | ZX_SRC_BURST_LEN(maxburst - 1)
>> | ZX_SRC_BURST_WIDTH(src_width)
>> - | ZX_DST_BURST_WIDTH(ZX_DMA_WIDTH_64BIT);
>> + | ZX_DST_BURST_WIDTH(src_width);
>> break;
>> default:
>> return -EINVAL;
>> --
>> 1.9.1
>>
> Hi Vinod,
>
> The two patches are based on your topic branch topic/zxdma. Please
> help review and apply to that branch. Thank you!
>
> Jun
Vinod,
Could you help check these patches? Thank you!
Jun
--
To unsubscribe from this list: send the line "unsubscribe dmaengine" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic