[prev in list] [next in list] [prev in thread] [next in thread] 

List:       djbdns
Subject:    Re: DNS - Reverse and mail
From:       prj () po ! cwru ! edu (Paul Jarc)
Date:       2001-09-26 19:56:06
[Download RAW message or body]

"treme metre" <lassies_revenge@hotmail.com> wrote:
> .13.145.216.in-addr.arpa:216.145.13.142:a:300
> .14.145.216.in-addr.arpa:216.145.14.172:a:300
> .14.145.216.in-addr.arpa:216.145.14.173:a:300

According to ARIN's servers, these domains are delegated to
ns1.vircom.net and ns2.vircom.net.  If that isn't you, you can skip
all the reverse stuff.  If it is you, then you need to use the same
names here:
.13.145.216.in-addr.arpa:216.145.13.150:ns1.vircom.net:300
.13.145.216.in-addr.arpa:216.145.13.151:ns2.vircom.net:300
.14.145.216.in-addr.arpa:216.145.13.150:ns1.vircom.net:300
.14.145.216.in-addr.arpa:216.145.13.151:ns2.vircom.net:300

> .steadynet.com:216.145.14.172:ns1.steadynet.com:300
> .steadynet.com:216.145.14.173:ns2.steadynet.com:300
> #.mail.steadynet.com:216.145.14.172:300
> .mail.steadynet.com:216.145.14.174:300

You don't need this "." line.  You only need "." lines for whole zones
that belong to you, not for names within those zones (unless you're
delegating them as subzones and also serving them, but you don't
appear to be).  Likewise for your ".faulk.kjv.com" lines.

> .melodiouswalk.com:216.145.14.172::300
> .melodiouswalk.com:216.145.14.173:300

You need the NS names here, but not the IP addresses (and you're
missing a colon on the second line, so what looks like a TTL is
actually an NS name):
.melodiouswalk.com::ns1.steadynet.com:300
.melodiouswalk.com::ns2.steadynet.com:300

> @mail.steadynet.com:216.145.14.174:300

This won't cause problems, but you're missing a colon, so it does
something very different from what you think.
@mail.steadynet.com:216.145.14.174:a:300


paul

[prev in list] [next in list] [prev in thread] [next in thread]