[prev in list] [next in list] [prev in thread] [next in thread]
List: devicetree
Subject: [PATCH 1/2] arm/dts: Mark vcxio, v2v1 and v1v8 regulators as always on
From: rnayak () ti ! com (Rajendra Nayak)
Date: 2012-07-30 13:24:19
Message-ID: 1343653940-16614-2-git-send-email-rnayak () ti ! com
[Download RAW message or body]
vcxio, v2v1 and v1v8 are expected to be always on, update the dtsi
for twl6030 to reflect this.
commit '86f5fc' regulator: core: Mark all DT based boards as having
full constraints) caused these to be disabled at late boot causing
OMAP4 boards (using twl6030) to lockup.
Reported-by: Kishon Vijay Abraham I <kishon at ti.com>
Reported-by: J Keerthy <j-keerthy at ti.com>
Signed-off-by: Rajendra nayak <rnayak at ti.com>
---
arch/arm/boot/dts/twl6030.dtsi | 3 +++
1 files changed, 3 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/twl6030.dtsi b/arch/arm/boot/dts/twl6030.dtsi
index 3b2f351..d351b27 100644
--- a/arch/arm/boot/dts/twl6030.dtsi
+++ b/arch/arm/boot/dts/twl6030.dtsi
@@ -66,6 +66,7 @@
vcxio: regulator at 8 {
compatible = "ti,twl6030-vcxio";
+ regulator-always-on;
};
vusb: regulator at 9 {
@@ -74,10 +75,12 @@
v1v8: regulator at 10 {
compatible = "ti,twl6030-v1v8";
+ regulator-always-on;
};
v2v1: regulator at 11 {
compatible = "ti,twl6030-v2v1";
+ regulator-always-on;
};
clk32kg: regulator at 12 {
--
1.7.1
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic