On Thu, Mar 19, 2009 at 11:03:38PM +0000, T o n g wrote:
> On Thu, 19 Mar 2009 15:40:11 -0700, Phillip Pi wrote:
> 
> > Did you run sensors-detect as root/sudo before? Then, add the lines it
> > detected. Here's mine:
> 
> Thanks for the instruction, and the example output too!
> 
> Mine doesn't look as good -- I mean, most values are wrong -- but here it 
> is anyway: 
> 
> k8temp-pci-00c3
> Adapter: PCI adapter
> Core0 Temp:   +8.0 C                                    
> Core0 Temp:   +6.0 C                                    
> Core1 Temp:   +7.0 C                                    
> Core1 Temp:   +3.0 C                                    
> 
> it8718-isa-0290
> Adapter: ISA adapter
> in0:         +1.12 V  (min =  +3.82 V, max =  +2.99 V)   ALARM
> in1:         +1.25 V  (min =  +3.06 V, max =  +4.08 V)   ALARM
> in2:         +3.49 V  (min =  +0.00 V, max =  +3.01 V)   ALARM
> in3:         +3.09 V  (min =  +2.03 V, max =  +3.82 V)   
> in4:         +3.12 V  (min =  +0.00 V, max =  +2.03 V)   ALARM
> in5:         +1.89 V  (min =  +4.05 V, max =  +4.08 V)   ALARM
> in6:         +1.26 V  (min =  +3.06 V, max =  +3.54 V)   ALARM
> in7:         +3.04 V  (min =  +3.95 V, max =  +4.08 V)   ALARM
> in8:         +3.12 V
> fan1:       1418 RPM  (min =   10 RPM)
> fan2:          0 RPM  (min =   32 RPM)  ALARM
> fan3:          0 RPM  (min =   10 RPM)  ALARM
> temp1:       +28.0 C  (low  = +127.0 C, high = +92.0 C)  sensor = thermal 
> diode
> temp2:      +127.0 C  (low  = +127.0 C, high = +92.0 C)  ALARM  sensor = 
> thermistor
> temp3:      +127.0 C  (low  = +127.0 C, high = +92.0 C)  ALARM  sensor = 
> thermistor
> cpu0_vid:   +1.550 V

That's better. Then, you can use GKrellM to show these. 

-- 
"I'm not a worker ant. I'm like a queen. Or maybe a king. But you never 
hear of king ants." --Sean Bentley
  /\___/\
 / /\ /\ \          Phil/Ant @ http://antfarm.ma.cx (Personal Web Site)
| |o   o| |         Ant's Quality Foraged Links (AQFL): http://aqfl.net
   \ _ /                 E-mail: philpi@earthlink.net or ant@zimage.com
    ( )


-- 
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org 
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org