[prev in list] [next in list] [prev in thread] [next in thread]
List: debian-user
Subject: Re: Samsung ML-2010 printer and kernel 2.6.22-1-686
From: Benjamí_Villoslada <benjami () gmail ! com>
Date: 2007-08-12 21:09:56
Message-ID: 200708122309.57128.benjami () gmail ! com
[Download RAW message or body]
El Diumenge 12 Agost 2007, Ron Johnson va escriure:
> Look at /etc/sysctl.conf to make that value persistent across boots.
Added usbcore.autosuspend=60 to etc/sysctl.conf:
- Error in boot log:
------------------------
Sun Aug 12 22:40:14 2007: Setting kernel
variables...error: "usbcore.autosuspend" is an unknown key
Sun Aug 12 22:40:14 2007: ^[[31mfailed.^[[39;49m
------------------------
Is the same error when I try to set usbcore.autosuspend=60
in /boot/grub/menu.lst
Seems that the parameter usbcore.autosuspend exists:
------------------------
# modinfo -p usbcore
autosuspend:default autosuspend delay
use_both_schemes:try the other device initialization scheme if the first one
fails
old_scheme_first:start with the old device initialization scheme
blinkenlights:true to cycle leds on hubs
usbfs_snoop:true to log all usbfs traffic
------------------------
And that is correct to write module.parameter=value
:?
Thanks :)
--
Benjamí
http://blog.bitassa.cat
.
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic