[prev in list] [next in list] [prev in thread] [next in thread]
List: cygwin
Subject: serial port read failure
From: "John E. A." <johnea () cox ! net>
Date: 2002-12-30 19:33:51
[Download RAW message or body]
Hi There,
I've been compiling a simple application in both linux and cygwin. I hacked it
from a GNU readline library application example: fileman.c
I added serial port device access (/dev/ttyS0) to this program via both stream
i/o (fopen, putc, etc) and low level i/o (open, read, etc) both versions work
when compiled under linux, neither work when compiled under cygwin.
I've stepped through my code using gdb --nw and find that the failures usually
occur in the fgetc and read functions.
Sometimes I can single-step through these functions with success, but they never
run successfully, at full speed, in cygwin.
I have a new full net install of cygwin: 1.3.17 including source, running on
win2k pro.
Can someone please provide some simple working example of serial port device access?
Additionally I am not able to step into the newlib source. Any tips on getting
gdb to step into the library function source would also be greatly appreciated.
For example, If I'm on a source line of:
143 data = fgetc(port);
and enter a gdb command of:
(gdb) s
my last printf data is flushed from the output buffer (it didn't end in \n) and
then it just hangs. When I C-c I get:
Program received signal SIGINT, Interrupt.
[Switching to thread 900.0x3f4]
0x77ec7fb0 in _libkernel32_a_iname ()
(gdb) Quit
(gdb) _
and I'm back at the gdb prompt.
Thank You for your reply...
John E. A.
--
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
Bug reporting: http://cygwin.com/bugs.html
Documentation: http://cygwin.com/docs.html
FAQ: http://cygwin.com/faq/
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic