[prev in list] [next in list] [prev in thread] [next in thread]
List: curl-library
Subject: Re: libcurl on QNX 6
From: Bjorn Reese <breese () mail1 ! stofanet ! dk>
Date: 2001-12-21 16:30:54
[Download RAW message or body]
Daniel Stenberg wrote:
>
> On Fri, 21 Dec 2001 David.Bentham@poole.siemens.co.uk wrote:
> > To me this all seems to point to a stack problem. The fact the fault moves
> > by removing a few valid executions from the execution path implies there is
> > nothing particularly nasty within socketerror() but delays the point at
> > which the stack craps out. I have also sort of assumed that the dodgy value
> > in the port number is due to stack corruption too.
>
> This does indeed sounds like some kind of stack problem. Have you measured
> how much stack it uses and much stack you have (left)?
There is a very high probability that this is a stack problem. I had a
similar problem with trio on QNX, where one array on the stack used some
100 Kb. The problem was fixed by making the array smaller.
I don't know what the default stack size on QNX is though.
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic