[prev in list] [next in list] [prev in thread] [next in thread]
List: cups-bugs
Subject: [cups.bugs] CUPS Ubuntu 7.04 lp -n lpr -# will not print multiple
From: Jeremy Tharp <jeremy.tharp () gmail ! com>
Date: 2007-12-14 0:33:43
Message-ID: 6232-cups.bugs () news ! easysw ! com
[Download RAW message or body]
I have been struggling for a significant amount of time, trying to make two printers \
print multiple copies using lp -n or lpr -#.
The printers are: Zebra EPL2 and HP LaserJet 2300n.
Both install without issue in CUPS 1.2 and print fine.
On my network I am sharing them from windows machines and printing them via a PHP \
interface using direct system commands.
An example of what should work is
lp -n2 -d shipping_2300n ./test.ps
or
lpr -#2 -P research_label ./test.ps
However, when I run either of these commands, I only get one copy.
MaxCopies is set to 100 in cupsd.conf
I discovered in the ppd files the "cupsManualCopies" tag. Finally -- I was able to \
print multiple copies, but it is seriously slow. CUPS simply sends the request to \
the printer how many ever times I request, rather than sending it once and telling \
the printer to print it n times.
The result is on the Zebra printer, I get about 1 label every 1/2 second -- which \
does not seem so bad, but it can print up to 6 labels per second.
The more dramatic problem is the pair of invoices I am printing on the 2300n which \
take up to 30 seconds a piece.
If anyone has any advice on this I will be appreciative. It is terribly frustrating, \
and I am guessing it is a bug with CUPS that does not properly send the "quantity" to \
the printer. _______________________________________________
cups-bugs mailing list
cups-bugs@easysw.com
http://lists.easysw.com/mailman/listinfo/cups-bugs
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic