>
> Once I tried running comedi_calibrate with channels 1-5 directly  
> shorted out
> to ground, separated from my circuit.  Then I connected my circuit  
> to channels
> 1-5.  I measured the voltage at the board with a voltmeter, where  
> the circuit
> output is connected to the DAQ.  Then I ran inpn.c.  Here's my  
> results:

Make sure you have your signal ground connect to AIGND on the NI  
terminal strip.  Also make sure you're running inpn with AREF_GROUND  
and not AREF_DIFF or something else.  It's an option you can pass  
to ./inpn, something like ./inpn -a 0 I believe.

Caleb

_______________________________________________
comedi mailing list
comedi@comedi.org
https://cvs.comedi.org/cgi-bin/mailman/listinfo/comedi