[prev in list] [next in list] [prev in thread] [next in thread]
List: comedi
Subject: ni6527 rising/falling edge monitoring
From: edouard charvet <edouard.charvet () fr ! thalesgroup ! com>
Date: 2005-07-25 11:36:19
Message-ID: 42E4CEB3.9B53A8F8 () fr ! thalesgroup ! com
[Download RAW message or body]
a few more infos :
I saw the following message in /var/log/messages :
"wait_for_sysfs[26387]:either wait_for_sysfs (udev 039) needs an update
to
handle the device '/class/comedi/comedi0' properly (no device symlink)
or
the sysfs-support of your device's driver needs to be fixed..."
Should my problem come from this ? I manage to read data on inputs
(using
DIO_reads) but the board doesn't seem to rise any interrupt although I
configured it using INSN_CONFIG_CHANGE_NOTIFY.
However, if I cat /proc/interrupts, I get on IRQ 9 :
"9: 100000 XT-PIC acpi, uhci_hcd, uhci_hcd, ni6527
This let me think that the ISR is properly set... Does the board only
rise
an interrupt when a buffer is half full or something like this ?
Any idea, please ?
Ed
_______________________________________________
comedi mailing list
comedi@comedi.org
https://cvs.comedi.org/cgi-bin/mailman/listinfo/comedi
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic