[prev in list] [next in list] [prev in thread] [next in thread]
List: comedi
Subject: Comedi driver for DAQP-208/308
From: Brent Baccala <baccala () freesoft ! org>
Date: 2000-10-13 19:46:07
[Download RAW message or body]
Hi -
Attached please find a tar file containing my current COMEDI driver for
the Quatech DAQP-208/308 PCMCIA cards. A/D supported on all 8 channels,
mode 0 only.
I've delayed sending this to you because of problems I've had with this
card dropping interrupts. I don't know what causes the problem; in
fact, I'm not sure if the card itself actually drops the interrupts or
if it's a host/software issue. In any event, the driver currently
operates by polling the card. :-<
The tar file contains:
- daqp_cs.c the driver itself. goes into comedi/drivers/
- daqp.patch patch for other things to recognize DAQP:
Makefile, Config.in, pcmcia/comedi.conf
and a slight patch to kern_compat.h to make sure
it doesn't conflict with PCMCIA's k_compat.h
- config.patch patch to top-level Makefile and config scripts
to install PCMCIA drivers in the right place,
prompt for PCMCIA dir in configuration dialog,
and remember setting of RT-Linux dir between configs
- dep.pcmcia config script to find PCMCIA tree. goes in scripts/
Apply all patches with -p1 in the dir comedi-0.7.50
These patches were originally built against comedi-0.7.48, so you'll get
some complaints about line offsets, but I've checked it out against
comedi-0.7.50 and it compiles OK.
--
-bwb
Brent Baccala
bacccala@FreeSoft.org
["comedi-bwb.tgz" (application/octet-stream)]
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic