[prev in list] [next in list] [prev in thread] [next in thread] 

List:       classiccmp
Subject:    Re: ASR-33 repair parts
From:       "Charles H. Dickman" <chd_1 () nktelco ! net>
Date:       2004-09-30 0:24:54
Message-ID: 415B5256.1050400 () nktelco ! net
[Download RAW message or body]

David Gesswein wrote:

>>The pad on the print hammer has disintegrated and the underlying metal
>>has been pounding on the print cylinder. This has caused some of the
>>letters images to be deformed so that only the top half of the letter
>>prints. A new print cylinder would be virtually impossible to fabricate,
>>so I need to find a new or used one.
>>    
>>
>
>With the new available it may not be worth the trouble but as long as the 
>damage isn't too deep you can get it to print acceptably by filing the 
>letters flat again, try printing and file again on the part of the letter
>that prints darkest until you get reasonably even printing.
>  
>
I had not thought of that. I can get a new print cylinder for $25 as 
somebody keeps reminding us all, but filing would be easy and simple and 
the cylinder is junk anyway. I can't make it much worse.


[prev in list] [next in list] [prev in thread] [next in thread]