[prev in list] [next in list] [prev in thread] [next in thread]
List: clamav-users
Subject: [clamav-users] Problems with freshclam (Can't create new socket: Address family not supported by pro
From: Klaus Ethgen <klaus+clamav () ethgen ! de>
Date: 2018-06-30 13:12:59
Message-ID: 20180630131257.GA32531 () ikki ! ethgen ! ch
[Download RAW message or body]
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512
Hi folks,
since several months I get the message "Can't create new socket: Address
family not supported by protocol" several times the day. It is only
freshclam that acts this wrong, no other tool/service has this problem.
The machine I use freshclam is IPv4 only; no IPv6 is compiled into the
kernel. Additionally the gai.conf say to prefer IPv4 over IPv6.
Unfortunately, the resolving of db.de.clamav.net (that I use, see below)
gives half IPv6 and half IPv6 addresses. There is a IPv6 only DNS name
but no IPv4 only DNS name.
I didn't also not find any solution to force freshclam to use IPv4 only.
- From that fact and that freshclam is running every hour, the change to
get the message is pretty high.
It is also notable that this has started several months ago.
Do you have any idea how to stop this annoying message without silenting
also real errors? Any idea how to force freshclam to behave like all
other software and just ignore the IPv6 addresses if there is no IPv6 on
this system?
Here is my config:
~> cat /etc/clamav/freshclam.conf
# Automatically created by the clamav-freshclam postinst
# Comments will get lost when you reconfigure the clamav-freshclam package
DatabaseOwner clamav
UpdateLogFile /var/log/clamav/freshclam.log
LogVerbose false
LogSyslog false
LogFacility LOG_LOCAL6
LogFileMaxSize 0
LogRotate true
LogTime true
Foreground false
Debug false
MaxAttempts 5
DatabaseDirectory /var/lib/clamav
DNSDatabaseInfo current.cvd.clamav.net
ConnectTimeout 30
ReceiveTimeout 30
TestDatabases yes
ScriptedUpdates yes
CompressLocalDatabase no
SafeBrowsing true
Bytecode true
DatabaseMirror db.de.clamav.net
DatabaseMirror database.clamav.net
~> cat /etc/cron.d/clamav-freshclam
59 */1 * * * clamav [ -x /usr/bin/freshclam ] && /usr/bin/freshclam --quiet >/dev/null
~> ifconfig
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 10.0.0.4 netmask 255.255.255.0 broadcast 10.0.0.255
ether 52:54:00:41:3f:f6 txqueuelen 1000 (Ethernet)
RX packets 22441291 bytes 31417154646 (29.2 GiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 27477983 bytes 27236010595 (25.3 GiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
loop txqueuelen 1 (Local Loopback)
RX packets 401467 bytes 338215821 (322.5 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 401467 bytes 338215821 (322.5 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
Note that the system has different IP outside, that is just the
internal IP. But the whole stack has no IPv6 at all and will not in
foreseeable future.
Regards
Klaus
- --
Klaus Ethgen http://www.ethgen.ch/
pub 4096R/4E20AF1C 2011-05-16 Klaus Ethgen <Klaus@Ethgen.ch>
Fingerprint: 85D4 CA42 952C 949B 1753 62B3 79D0 B06F 4E20 AF1C
-----BEGIN PGP SIGNATURE-----
Comment: Charset: ISO-8859-1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=AjJn
-----END PGP SIGNATURE-----
_______________________________________________
clamav-users mailing list
clamav-users@lists.clamav.net
http://lists.clamav.net/cgi-bin/mailman/listinfo/clamav-users
Help us build a comprehensive ClamAV guide:
https://github.com/vrtadmin/clamav-faq
http://www.clamav.net/contact.html#ml
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic