[prev in list] [next in list] [prev in thread] [next in thread] 

List:       cisco-voip
Subject:    Re: [cisco-voip] [CAUTION! EXTERNAL]  SIP Plar to 8841 phones
From:       "Pawlowski, Adam" <ajp26 () buffalo ! edu>
Date:       2019-10-24 14:19:07
Message-ID: d7bef7e8ec054f2eaba938e2e3cbadfe () MBX-LS1 ! itorg ! ad ! buffalo ! edu
[Download RAW message or body]

I've gotten this to work without defining the calling line, however, this results in \
all of the lines on the phone attempting to ring down which is lame.

I can see your comment in the blog post about this and I actually have a discussion \
about the use of this in about 40 minutes so --- rad ! 

Nice post thanks for putting that up !

Adam


> -----Original Message-----
> From: cisco-voip <cisco-voip-bounces@puck.nether.net> On Behalf Of
> Mergenthal, Chase
> Sent: Thursday, October 24, 2019 9:12 AM
> To: Myron Young <mdavid_young@hotmail.com>; cisco-voip voyp list <cisco-
> voip@puck.nether.net>
> Subject: Re: [cisco-voip] [CAUTION! EXTERNAL] SIP Plar to 8841 phones
> 
> Running CUCM 12.5 and a 8851's and it works fine.
> 
> Maybe try to create a new CSS / PT for your null translation pattern, and make
> sure its applied to the phone...
> It might also help if you create a new SIP Dial rule with a single line for the
> PLAR for testing...
> 
> ------------------------------------------------------------------------------------------------------
>  Chase Mergenthal
> 
> -----Original Message-----
> From: cisco-voip <cisco-voip-bounces@puck.nether.net> On Behalf Of Myron
> Young
> Sent: Thursday, October 24, 2019 7:38 AM
> To: cisco-voip voyp list <cisco-voip@puck.nether.net>
> Subject: [CAUTION! EXTERNAL] [cisco-voip] SIP Plar to 8841 phones
> 
> 
> âš  The sender was not validated and could be a phish. âš  Slow down, read
> carefully and look for signs that it may be a phish. Click the report phish button
> or forward this email to phishing@bestbuy. com if you think it's malicious.
> 
> 
> 
> Hello,
> 
> Has anyone ever gotten the plar to work for SIP 8841 phones? I'm setting it up
> now with one 6901 skinny phone and two 8841 sip phones on CUCM 9.1 but the
> 8841 phones don't dial the 6901 phone. I'm able to get it working from skinny
> 6901 phone to 8841 phone no problem but can't get it to work opposite way
> around. I have all the partitions, CSS, translation patterns and sip dial rules
> configured, but when i pick up handset of 8841 phone I just get dial tone
> instead of ring back from calling the 6901 phone.
> _______________________________________________
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://urldefense.com/v3/__https://puck.nether.net/mailman/listinfo/cisco-
> voip__;!OtTxrmHEG2g!_Zb0FNjfCEMt_txtHYto8QtniJTFen-
> 76SH0svdtH0XssnjQIuCVYiNPCv_OUdtuMi58Lw$
> _______________________________________________
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
_______________________________________________
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip


[prev in list] [next in list] [prev in thread] [next in thread]