[prev in list] [next in list] [prev in thread] [next in thread]
List: cisco-voip
Subject: Re: [cisco-voip] Contact type Objects in Active Directory and LDAP
From: Mike King <me () mpking ! com>
Date: 2010-12-28 21:51:05
Message-ID: AANLkTimOkrP6_83Mfqkv8ezoVQgX7ZHsybRhXR5d3cci () mail ! gmail ! com
[Download RAW message or body]
Read the Supportforums link I sent you. It describes the whole process.
On Tue, Dec 28, 2010 at 4:08 PM, Jorge L. Rodriguez Aguila
<jorge.rodriguez@netxar.com> wrote:
> Thanks I think I found the problem in that CCM uses the field saMaccountName (or \
> something like that) to populate the user I'd field which contacts within Windows \
> AD do not have so I think that might be why I can't pull them into ccm
>
>
> ----- Original Message -----
> From: michael.p.king@gmail.com <michael.p.king@gmail.com>
> To: Jorge L. Rodriguez Aguila
> Cc: Ryan Ratliff <rratliff@cisco.com>; cisco-voip@puck.nether.net \
> <cisco-voip@puck.nether.net>
> Sent: Tue Dec 28 16:58:09 2010
> Subject: Re: [cisco-voip] Contact type Objects in Active Directory and LDAP \
> Integration, Is it possible to have these show up on AD INtegrated CCM8?
> I think it's your Boolean
>
> If you did a direct cut and paste, you look like you have a leading
> space in the ( Objectclass=contact)
>
>
>
> On Tue, Dec 28, 2010 at 2:12 PM, Jorge L. Rodriguez Aguila
> <jorge.rodriguez@netxar.com> wrote:
> > I Took the default Ldap filter which is
> > &(objectclass=user)(!(objectclass=Computer))(!(UserAccountControl:1.2.840.113556.1.4.803:=2)))
> >
> > And converted to this string (&(objectclass=user)(
> > objectclass=contact)(!(objectclass=Computer))(!(UserAccountControl:1.2.840.113556.1.4.803:=2)))
> >
> > but it doesn’t seem to work, any idea what am I doing wrong?
> >
> >
> >
> > Jorge
> >
> >
> >
> > From: Ryan Ratliff [mailto:rratliff@cisco.com]
> > Sent: Tuesday, December 28, 2010 11:59 AM
> > To: Jorge L. Rodriguez Aguila
> > Cc: cisco-voip@puck.nether.net
> > Subject: Re: [cisco-voip] Contact type Objects in Active Directory and LDAP
> > Integration, Is it possible to have these show up on AD INtegrated CCM8?
> >
> >
> >
> > If you want to pull in Contact objects as users in CUCM then you'll need to
> > adjust the ldap filter to pull them in.
> >
> >
> >
> > -Ryan
> >
> >
> >
> > On Dec 24, 2010, at 11:09 AM, Jorge L. Rodriguez Aguila wrote:
> >
> > I have an CUCM 8.0 Deployment that I integrated with a MSFT 2003 AD and I
> > have pulled all the users but the client asked me if there was a way to have
> > their Contacts within the AD into the CCM directory as well. From what I
> > have seen, I am not pulling these into the CCM User DB. Is this possible, do
> > I need to do something else besides the integration? The contacts reside in
> > the Same Users container as the Users.
> >
> >
> >
> > Jorge Rodriguez,CCNP-Voice
> >
> > Senior Voice/Data Consultant
> >
> > Netxar Technologies
> >
> > PCS 7876888530
> >
> > jorge.rodriguez@netxar.com
> >
> > <image001.png>
> >
> >
> >
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip@puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
> >
> >
> >
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip@puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
> >
> >
>
_______________________________________________
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic