[prev in list] [next in list] [prev in thread] [next in thread] 

List:       cisco-voip
Subject:    Re: [cisco-voip] hunt groups + hunting with analog lines for
From:       Paul Choi <asobihoudai () yahoo ! com>
Date:       2007-12-27 20:55:52
Message-ID: 680802.36403.qm () web57202 ! mail ! re3 ! yahoo ! com
[Download RAW message or body]

Ok, Thanks!

Paul

----- Original Message ----
From: Matthew Saskin <matt@saskin.net>
To: Paul Choi <asobihoudai@yahoo.com>
Cc: cisco-voip@puck.nether.net
Sent: Thursday, December 27, 2007 12:53:28 PM
Subject: Re: [cisco-voip] hunt groups + hunting with analog lines for inbound calls

Need to involve the telco.  Unless the lines are provisioned as DID 
trunks (which they aren't) they are not going to pass you any DNIS 
information down the line, one to one correlation between physical port
 
and the respective phone number.

-matt

Paul Choi wrote:
> Is it possible to use hunt groups for the purpose of having inbound
 calls hunt from port to port?
> 
> I have a 3725 box with eight FXO trunks. What if I have trunks with
 4100, 4101, 41....07 and would like for the lines to hunt from 4100 to
 4101 if 4100 is occupied etc. Must I involve the telco to setup the hunt
 groups at the CO or is there a way of forcing these trunks to hunt
 within the router?
> 
> Paul
> 
> 
> 
> 
>      
 ____________________________________________________________________________________
> Never miss a thing.  Make Yahoo your home page. 
> http://www.yahoo.com/r/hs
> _______________________________________________
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip






      ____________________________________________________________________________________
Never miss a thing.  Make Yahoo your home page. 
http://www.yahoo.com/r/hs

[prev in list] [next in list] [prev in thread] [next in thread]