[prev in list] [next in list] [prev in thread] [next in thread]
List: cisco-nsp
Subject: Re: [nsp] C800 and tacacs
From: "Stefan M. Brandl" <smb () r-kom ! de>
Date: 2001-06-28 7:04:22
[Download RAW message or body]
On Wed, Jun 27, 2001 at 11:31:43AM -0500, Young, Jason wrote:
>
> I stumbled across the exact same problem and asked Cisco about it. Their
> response was TACACS is not present in IP-only images and I would need IP Plus.
?!?!?!
Strange thing, then why are the commands present?!
> At that point, I dropped the issue because the 801 in question didn't have
> sufficient RAM/flash to go there and I couldn't have it upgraded.
>
Yes, and the other problem is the higher price (at least in Germany) of
the IP-Plus image.
> I told the Cisco rep I thought it was a bug that should be fixed (that the
> options were present but broken), but I don't think it got reported and
> obviously it didn't get fixed if it's in 12.2.1.
>
No, it still isn't fixed in 12.2.1.
I think they should fix it or remove the commands in the IP-Only image.
Stefan
--
Stefan M. Brandl R-KOM GmbH & Co. KG
E-Mail: smb@r-kom.de Greflingerstr. 26
PGP-Key available at http://www.smbnet.de/pgpkey.php3 93055 Regensburg
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic