[prev in list] [next in list] [prev in thread] [next in thread] 

List:       cisco-nsp
Subject:    RE: No running configuration
From:       "Desmarais, Jonathan" <JDesmarais () colt-telecom ! com>
Date:       2001-04-30 15:27:26
[Download RAW message or body]

Ensure you don't have mem-dumb files or something clogging up you nvram. can
you copy the start-up to the running?

copy start runn 

Jon..

-----Original Message-----
From: Jared Mauch [mailto:jared@puck.nether.net]
Sent: 30 April 2001 15:57
To: Brian Murphy
Cc: dine@swiftkenya.com; 'Cisco-Nsp'
Subject: Re: No running configuration


On Mon, Apr 30, 2001 at 04:48:09PM +0200, Brian Murphy wrote:
> Dine,
> Can you please supply a copy of the configuration, minus passwords
> etc......

	You seem to be missing the fact that when "sh run" is issued
nothing is displayed.

	I would recommend doing this:

	clear ip route *

	That should sufficently defragment the memory that
you can issue "sh run" and "wr" or whatever commands you use
to save your config.

	- jared

> -----Original Message-----
> From: Dragan Dincic - Dine [mailto:dine@swiftkenya.com] 
> Sent: Monday, April 30, 2001 3:58 PM
> To: BrianM@dial.pipex.com; 'Cisco-Nsp'
> Subject: RE: No running configuration
> 
> I have seen now that I'm missing that info...
> 
> cisco 3640 (R4700) processor (revision 0x00) with 
27648K/5120K bytes of
> memory.
> 8192K bytes of processor board System flash (Read/Write)
> 
> Which is exactly what CISCO is recommending...
> 
> 
> dine
> 
> 
> 
> 
> -----Original Message-----
> From: Brian Murphy [mailto:BrianM@dial.pipex.com]
> Sent: Monday, April 30, 2001 16:54
> To: dine@swiftkenya.com; 'Cisco-Nsp'
> Subject: RE: No running configuration
> 
> 
> Dragan Dincic - Dine,
> There is some critical information missing from the show version you
> included in your previous email, but according to cisco the memory
> requirements for your IOS and platform are as follows:
> 
> 
> Minimum Recommended Memory to download image - 8 MB Flash and 
32 MB RAM
> 
> 
> -----Original Message-----
> From: Dragan Dincic - Dine [mailto:dine@swiftkenya.com]
> Sent: Monday, April 30, 2001 3:42 PM
> To: Cisco-Nsp
> Subject: No running configuration
> 
> Has anybody experienced this:
> When you do the "sh running-config " - there is no running
> configuration.
> If you issue "sh startup-config " - configuration is there.
> 
> just terminal monitor reveals following:
> 02:45:27: %SYS-2-MALLOCFAIL: Memory allocation of 129016 bytes failed
> from
> 0x60239AD8, pool Processor, alignment 0
> 
> -Process= "Virtual Exec", ipl= 0, pid= 54
> -Traceback= 602AC974 602AE3F8 60239AE0 6025AA50 60251EE4 6025D45C
> 602A3F2C
> 602A3F18h flas
> 
> PID
> [54 130      54836      52420      15272          0          0 Virtual
> Exec]
> 
> If I try to copy startup into the running configuration  I 
get following
> error:
> 
> %Error opening system:/running-config (Not enough space)
> 
> 
> Below is the version of the IOS that I'm running and memory
> configuration.
> 
> #sh ver
> Cisco Internetwork Operating System Software
> IOS (tm) 3600 Software (C3640-IS-M), Version 12.0(4)T,  
RELEASE SOFTWARE
> (fc1)
> System image file is "flash:c3640-is-mz.120-4.T.bin"
> 
> 2 Ethernet/IEEE 802.3 interface(s)
> 46 Serial network interface(s)
> 2 Channelized E1/PRI port(s)
> DRAM configuration is 64 bits wide with parity disabled.
> 125K bytes of non-volatile configuration memory.
> 8192K bytes of processor board System flash (Read/Write)
> 
> Configuration register is 0x2102
> 
> 
> 
> 
> 
> 
> Dragan Dincic - Dine
> Technical Manager
> Swift Global (K) Ltd.
> dine@swiftkenya.com
> ==============
> P.O. BOX 42164
> Nairobi, KENYA
> ~~~~~~~~~~~~~~
> Tel : +254 2 545 533
> Fax : +254 2 545 534
> ~~~~~~~~~~~~~~
> 

-- 
Jared Mauch  | pgp key available via finger from jared@puck.nether.net
clue++;      | http://puck.nether.net/~jared/  My statements 
are only mine.


**********************************************************************
COLT Telecommunications
Registered in England No. 2452736
Registered Office: Bishopsgate Court, 4 Norton Folgate, London E1 6DQ
Tel. 020 7390 3900

This message is subject to and does not create or vary any contractual
relationship between COLT Telecommunications, its subsidiaries or 
affiliates ("COLT") and you. Internet communications are not secure
and therefore COLT does not accept legal responsibility for the
contents of this message.  Any view or opinions expressed are those of
the author. The message is intended for the addressee only and its
contents and any attached files are strictly confidential. If you have
received it in error, please telephone the number above. Thank you.


**********************************************************************

[prev in list] [next in list] [prev in thread] [next in thread]