[prev in list] [next in list] [prev in thread] [next in thread] 

List:       cisco-nsp
Subject:    Re: AS5800/AS5300 &  ISDN
From:       Trent Fierro <trentf () cisco ! com>
Date:       2001-04-28 15:22:00
[Download RAW message or body]


The HDLC controllers are on the E1 cards, so support for ISDN is there. 
Your config will change.
You do not use the modems, but you use DSO's.

Not sure what service you'll offer, but if the client is using a BRI, 
you'll have
the ability to use two DSO's instead of one into the gateway. With 
compression, you tend
to have a faster connection. Settings can be setup dynamically, torn down, etc.

http://www.cisco.com/warp/public/2/ISDN.html

tf



At 10:45 AM 4/28/2001 +0200, tam wrote:
>Hello
>
>In my network i have a lot of AS 5300 & AS 5800 until now we are just
>offering a normal analouge dial-up do we have to add any special cards
>inorder to start offering ISDN services? and what are the limitaions on
>this? on the AS5800 we have 4*12=48 E1 while we have only
>1152 modems wich utilize about 39E1 , can we use the rest (9E1) for ISDN
>calls? do ISDN work with R2 signalling (the type of signalling we use) and
>finally what are the main advanteges of ISDN?
>
>
>All The Best
>
>Tamer

Trent Fierro								Dial Tech Marketing Mgr
408 526 4261 Ph							SPLOB
408 853 1827 Fax							Cisco Systems, Inc

[prev in list] [next in list] [prev in thread] [next in thread]