[prev in list] [next in list] [prev in thread] [next in thread] 

List:       cisco-nsp
Subject:    Re: [nsp] uBR strangeness
From:       Bert Kellerman <bertke () charter ! net>
Date:       2000-11-26 10:02:17
[Download RAW message or body]

Unless there is a newer cisco link, it looks like they are only good
until reload  :(

http://www.cisco.com/univercd/cc/td/doc/product/software/ios113ed/113na/1138na/724638na.htm#xtocid2721411


Bert

Basil Dolmatov wrote:
> 
> Oops... I thought that "conf t" is necessary before issuing these
> commands... Thanks, I have found these commands in this very place.
> 
> How are their results reflected in config, or are these settings effective
> until reload only?
> 
> --------------------------------------------------------
> Basil (Vasily)  Dolmatov CCIE #5347, CCNP-Security, CCDA
> 
> On Sat, 25 Nov 2000, Bert Kellerman wrote:
> 
> > Heya Basil,
> >
> >
> > CMTS1#sh ver
> > Cisco Internetwork Operating System Software
> > IOS (tm) 7200 Software (UBR7200-IST-M), Version 12.1(3)T,  RELEASE
> > SOFTWARE (fc1)
> > Copyright (c) 1986-2000 by cisco Systems, Inc.
> > Compiled Wed 19-Jul-00 04:15 by ccai
> > Image text-base: 0x60008960, data-base: 0x6137C000
> >
> > CMTS1#cable ?
> >   device  Cable modem or host commands
> >   host    Cable host (behind modem) commands
> >   modem   Cable modem commands
> >
> > CMTS1#cabl modem ?
> >   A.B.C.D  IP address of this modem
> >   H.H.H    MAC address of this modem
> >
> > CMTS1#cabl modem 1111.1111.1111 ?
> >   access-group      Access-group
> >   change-frequency  Change DS frequency or US channel id
> >   max-hosts         Modem max hosts number
> >   no                Remove access-group
> >   qos               Cable quality of service
> >
> > CMTS1#cabl modem 1111.1111.1111 access-group ?
> >   <1-199>  IP access list (standard or extended)
> >   WORD     Access-list name
> >
> >
> > Everything looks okay to me :)
> >
> >
> > Bert
> >
> > Basil Dolmatov wrote:
> > >
> > > Hello!
> > >
> > > I am trying to set up ACLs for hosts, connected via cable modems,
> > > but command "cable host 1.1.1.1 access-group 101", described in
> > > documentation is missed in command line parser (as well as command
> > > "cable modem ... access-group" with similar meaning).
> > >
> > > IOS version is 12.1(3)T.
> > >
> > > Do  I miss something important and underlying idea was changed
> > > significantly?
> > >
> > > --------------------------------------------------------
> > > Basil (Vasily) Dolmatov, CCIE #5347, CCNP-Security, CCDA
> > > LightCom Corp. http://www.lightcom.ru
> >

[prev in list] [next in list] [prev in thread] [next in thread]