[prev in list] [next in list] [prev in thread] [next in thread]
List: cisco-nsp
Subject: Re: [nsp] RES: NAT overload and static port mapping
From: Alfredo Sola <alfredo () intelideas ! com>
Date: 2000-04-27 12:58:07
[Download RAW message or body]
> You have to run IP Plus to get NAT Static. Cisco IOS 12.x (i donīt know
> exactly which x) have this feature built-in.
All 12 versions have full NAT, including static, in IP-only; previous
versions have NAT in IP Plus.
> -----Mensagem original-----
> De: Charles Sprickman [mailto:spork@inch.com]
> Enviada em: Quarta-feira, 26 de Abril de 2000 14:53
> Para: cisco-nsp@puck.nether.net
> Assunto: NAT overload and static port mapping
>
> Hello,
>
> Looking at config guides, and command references from 11.2 to 12.0, I'm
> not able to find any mention of static port mapping. Is this possible?
>
> ie: serial0 is 10.0.0.1/30, eth0 is 192.168.0.1/24 and there is a mail
> server "inside" at 192.168.0.100. I want anything directed at 10.0.0.1
> tcp port 25 to go to 192.168.0.100. I've done this on other cpe, but I'm
> not seeing any mention of it in the docs here...
>
> Thanks,
>
> Charles
>
> | Charles Sprickman | Internet Channel
> | INCH System Administration Team | (212)243-5200
> | spork@inch.com | access@inch.com
--
Alfredo Sola
Administrador del sistema
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic