[prev in list] [next in list] [prev in thread] [next in thread] 

List:       cisco-nsp
Subject:    Re: [nsp] Router Reset problem
From:       "Basil V. Dolmatov" <dol () east ! ru>
Date:       1998-03-27 19:17:00
[Download RAW message or body]

> On Wed, 25 Mar 1998, Michael Smith wrote:
> 
> > Hello All:
> > 
> > I have a 7505 that, upon issuing the following commands, reboots itself with
> > a Bus error.  I have a case open with TAC, but they have to hunt down a
> > particular programmer to decode the stac trace, and it may take several
> > days.
> > 
> > Here it is:
> > 
> > copy tftp start
> > copy start run
If you have problems with this kind of router crash, please, refer to TAC with bugID
CSCdj75432


Hope, it helps, 
Basil
> > 
> > I have about 100 PVC's on 7 serial ports and, upon issuing the copy ru sta
> > portion, I get about 90 "PVC already defined" messages and then it just
> > stops and reboots.
> > 
> > We used to do configs on the router and then offload them to the tftp
> > server, but I'm trying put all the configs under revision control, so I
> > would prefer this method.
> > 
> > Any help would be greatly appreciated!
> > 
> > Mike
> > 
> > Michael K. Smith
> > Senior Network Administrator - Northwest Link
> > (800) 390-1270
> > http://www.nwlink.com
> > mksmith@nwlink.com
> > 
> > 
> 
> -------------------------------------------------------------------
> Scott Whyte     swhyte@cisco.com |Any opinions expressed herein are 
> Network Supported Accounts (NSA) |mine and not cisco's...
> CCIE 3340                        |
>                                  | "Eschew Obfuscation"
> 

--------------------------------------
Basil (Vasily)  Dolmatov   dol@east.ru        +7-095-956-4951
East Connection ISP, Moscow, Russia. (http://www.east.ru)

Nick handles ;) : BVD12, DOL1-RIPE, VVD2-RIPN

[prev in list] [next in list] [prev in thread] [next in thread]