[prev in list] [next in list] [prev in thread] [next in thread]
List: cisco-nsp
Subject: Re: [c-nsp] Cat6500 VLAN cannot be assigned to a routed port sub-if?
From: Anders_Löwinger <anders () abundo ! se>
Date: 2016-09-19 21:57:39
Message-ID: 95889cb4-7e70-2a6b-4ad7-ace01ff057ce () abundo ! se
[Download RAW message or body]
On 2016-09-19 22:48, Peter Rathlev wrote:
> Just to be crystal clear: Sup2T hardware and software fully supports
> using same VLAN ID on different interfaces, and you can mix it with a
> SVI for good measure. Nick Cutting posted a configuration snippet that
> shows what can be done.
Ok missed that, and its great news!
> The Sup2T certainly has shortcomings but this is not one of them.
Agree.
Anyone tried the sup6t? Any feedback?
/Anders
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic