[prev in list] [next in list] [prev in thread] [next in thread] 

List:       cisco-nsp
Subject:    Re: [c-nsp] replace Huawei HG863 GPON terminal with Cisco gear
From:       Tarko Tikan <tarko () lanparty ! ee>
Date:       2014-02-28 8:52:06
Message-ID: 53104E36.9080003 () lanparty ! ee
[Download RAW message or body]

hey,

> So I guess
> this Huawei GPON ONT in SFP form-factor will be something like RAD
> MIRICi-155(http://www.radproductsonline.com/support/cs11c01/radcnt/mediaserver/18805_MIRICI-155.pdf)
> which supports management over web-interface(or maybe even CLI is
> available)

SFP form-factor is SFP :)

> one could change the serial-number of this ONT? Is the 16

Why do you insist changing this? If you have compatible ONT just let ISP 
change the serial in their end (*).

> hex characters some sort of industry-standard or is this vendor-specific
> as well?

To my best knowledge, it's standard.

(*) In real life, it's not that easy. ONT is provisioned using service 
profiles that are defined in OLT. Profile defines things like number of 
expected ethernet ports in ONT, number of POTS ports, IP/routing 
capabilities, vlan mappings from GEM to ONT ports etc. When you have 
mismatch between profile and real life (ie. you replace 4-port ONT with 
SFP that says "1 ethernet port" in it's capabilities in OMCI), ONT will 
not be provisioned.

(G)PON is not like DSL, don't expect to bring your own ONT.

-- 
tarko
_______________________________________________
cisco-nsp mailing list  cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
[prev in list] [next in list] [prev in thread] [next in thread]