[prev in list] [next in list] [prev in thread] [next in thread] 

List:       cisco-nsp
Subject:    Re: [c-nsp] 6509 SUP2 rommon
From:       Chris Gotstein <chris () uplogon ! com>
Date:       2012-03-27 23:04:21
Message-ID: 4F724775.1090803 () uplogon ! com
[Download RAW message or body]

Wish it was the easy, to expensive to upgrade right now and don't really 
need the extra horsepower.

On 3/27/2012 6:02 PM, Andrew Jones wrote:
> I know this probably isn't the answer youre after, but perhaps its time to upgrade:
> http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps708/prod_end-of-life_notice0900aecd80423d31.html
>  
> Andrew Jones
> 
> 
> -----Original Message-----
> From: cisco-nsp-bounces@puck.nether.net [mailto:cisco-nsp-bounces@puck.nether.net] \
>                 On Behalf Of Chris Gotstein
> Sent: Tuesday, 27 March 2012 3:10 PM
> To: Chuck Church
> Cc: 'cisco-nsp'
> Subject: Re: [c-nsp] 6509 SUP2 rommon
> 
> IOS 12.2(18)SXF17a
> 
> No changes, in fact it had been up and running for over 300 days since
> the last reboot.  I could try re-seating the SUPs, maybe swap the 2
> around to see if it's a slot issue or problem with the module.
> 
> On 3/26/2012 9:47 PM, Chuck Church wrote:
> > Sounds like a potential chassis issue.  IOS version?  Any changes recently
> > or bent pins maybe?  Blow dust out, reseat sups, maybe that'll fix it.
> > 
> > Chuck
> > 
> > -----Original Message-----
> > From: cisco-nsp-bounces@puck.nether.net
> > [mailto:cisco-nsp-bounces@puck.nether.net] On Behalf Of Chris Gotstein
> > Sent: Monday, March 26, 2012 6:14 PM
> > To: cisco-nsp
> > Subject: [c-nsp] 6509 SUP2 rommon
> > 
> > We had an incident over the weekend in which our 6509 crashed.  When i
> > arrived to see the problem, bith SUP2's were in rommon.  I issued a reset on
> > both, and they came up without any problems.  Now i'm seeing the following
> > errors:
> > 
> > 000060: Mar 24 13:59:56.902 CDT: %OIR-SP-4-WARN: PRIMARY(2) REPORTED AS NOT
> > OCCUPIED IN SLOT!! disable_reason: 26(off (Module Removed)),
> > get_peer_previous_slot: 0, is_occupied fn ptr:0x40497DE8
> > 000061: Mar 24 14:07:58.889 CDT: %OIR-SP-4-WARN: PRIMARY(2) REPORTED AS NOT
> > OCCUPIED IN SLOT!! disable_reason: 26(off (Module Removed)),
> > get_peer_previous_slot: 0, is_occupied fn ptr:0x40497DE8
> > 
> > Everything is working fine, but I'm concerned about the error messages.
> > A search on Cisco's site doesn't really explain much.  Note, the SUP2's
> > are in the first 2 slots in the 6509 chassis.  Any thoughts?
> > 
> > --
> > ---- ---- ---- ----
> > Chris Gotstein, Network Engineer, U.P. Logon/Computer Connection U.P.
> > http://uplogon.com | +1 906 774 4847 | chris@uplogon.com
> > _______________________________________________
> > cisco-nsp mailing list  cisco-nsp@puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/
> > 
> 

-- 
---- ---- ---- ----
Chris Gotstein, Network Engineer, U.P. Logon/Computer Connection U.P.
http://uplogon.com | +1 906 774 4847 | chris@uplogon.com
_______________________________________________
cisco-nsp mailing list  cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/


[prev in list] [next in list] [prev in thread] [next in thread]