[prev in list] [next in list] [prev in thread] [next in thread] 

List:       cisco-nsp
Subject:    Re: [c-nsp] Tunnel Up and Down State
From:       "Aaron Riemer" <ariemer () amnet ! net ! au>
Date:       2011-02-28 7:27:09
Message-ID: 006201cbd718$e9385080$bba8f180$ () net ! au
[Download RAW message or body]

If you are using GRE look into using keepalives.

http://www.cisco.com/en/US/tech/tk827/tk369/technologies_tech_note09186a0080
48cffc.shtml

Cheers,

-Aaron

-----Original Message-----
From: cisco-nsp-bounces@puck.nether.net
[mailto:cisco-nsp-bounces@puck.nether.net] On Behalf Of Righa Shake
Sent: Monday, 28 February 2011 2:41 PM
To: cisco-nsp@puck.nether.net
Subject: [c-nsp] Tunnel Up and Down State

Hi,

Am having a problem where by my tunnel state is still up even though the end
point is down.

How do i set the tunnel such that when the end point is down then the tunnel
state is also down.

Regards,
Righa
_______________________________________________
cisco-nsp mailing list  cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

_______________________________________________
cisco-nsp mailing list  cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
[prev in list] [next in list] [prev in thread] [next in thread]