[prev in list] [next in list] [prev in thread] [next in thread]
List: cisco-nsp
Subject: Re: [c-nsp] PA-2T3+ vs PA-MC-2T3
From: Jay Hennigan <jay () west ! net>
Date: 2011-01-28 9:20:17
Message-ID: 4D428A51.8090405 () west ! net
[Download RAW message or body]
On 1/28/11 12:11 AM, Christopher Wolff wrote:
> Hello,
>
> I'm looking at setting up a 7206vxr/NPEG1 with two DS3 BGP peers and
> I'm wondering if there's any substantial difference between the
> PA-2T3+ and the PA-MC-2T3. Thanks in advance.
Yes, very much difference. The PA-2T3+ is used for clear-channel DS3.
The PA-MC-2T3 is used with a mux to split each DS3 into 28 individual T1s.
For your purpose you want the PA-2T3+.
--
Jay Hennigan - CCIE #7880 - Network Engineering - jay@impulse.net
Impulse Internet Service - http://www.impulse.net/
Your local telephone and internet company - 805 884-6323 - WB6RDV
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic