[prev in list] [next in list] [prev in thread] [next in thread] 

List:       cisco-nsp
Subject:    Re: [c-nsp] C892 & PPPoE on VLANs
From:       Łukasz_Bromirski <lukasz () bromirski ! net>
Date:       2010-09-29 22:45:18
Message-ID: 4CA3C17E.6050309 () bromirski ! net
[Download RAW message or body]

On 2010-09-29 16:14, Garry wrote:

> I was looking at the 892 mainly due to the rather high throughput rating
> if 50+ MBit/s (compared to ~16MBit on the 870 series). Looks to be nice,
> just want to ensure it does handle its switch ports (it has 8 FE-TX
> ports) as the 870/880 series does ... I need to hook up something like
> 2-3 PPPoE-connections to the router, which we usually do using vlan 2
> through n and then configuring each vlan interface for doing the actual
> dialup through a dialer interface ... I would expect the 890 series to
> work the same ... anybody happen to have any experience yet? Or is there
> a limitation to the number of vlans?

It works the same with regards to switch ports, however the WLAN AP
is autonomous.

You can configure up to 14 VLANs (Table 3):
http://www.cisco.com/en/US/prod/collateral/routers/ps380/data_sheet_c78-519930.html

-- 
"Everything will be okay in the end.  |                 Łukasz Bromirski
  If it's not okay, it's not the end." |      http://lukasz.bromirski.net
_______________________________________________
cisco-nsp mailing list  cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

[prev in list] [next in list] [prev in thread] [next in thread]