[prev in list] [next in list] [prev in thread] [next in thread]
List: cisco-nsp
Subject: Re: [c-nsp] %ERROR: Standby doesn't support this command
From: Lee <ler762 () gmail ! com>
Date: 2010-07-30 18:30:05
Message-ID: AANLkTikYKGUu6ROwu=b9d6ha0Sw1mHp4pSeTKGkt6mSL () mail ! gmail ! com
[Download RAW message or body]
On 7/30/10, Church, Charles <Charles.Church@harris.com> wrote:
> Anyone,
>
> I'm having issues with some 4510s with dual Sup6-E running
> 12.2(53)SG2 doing this on interface range command. Making our deployment
> kind of tough:
>
> SCUAS01(config-if)#interface range GigabitEthernet1/1 - 48
> SCUAS01(config-if-range)# switchport mode access
> %ERROR: Standby doesn't support this command
> % Command failed on interface. Aborting
> SCUAS01(config)#
I don't remember the error message, but I've had that same type of
problem where a 'switchport mode access' fails when applied to a
range. A
default int range g1/1 - 48
int range g1/1 - 48
switchport mode access
gets around the problem. But we have very few switches with dual
supervisors, so it might be a work-around for a different problem...
Regards,
Lee
>
> In the release notes it claims a similar issue was fixed:
> http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/release/note/OL_51
> 84.html CSCsa67042 But that's from a while ago. I'm told by our
> installer guy that occasionally it is accepted, seems to depend on if the
> switch was recently rebooted, he claims. The interface type is correct. I
> tried using bug navigator, but it's not giving me any results, not sure if
> it's working right today, or if I've got a browser issue. Any help
> appreciated.
>
> Thanks,
>
> Chuck
>
>
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic