[prev in list] [next in list] [prev in thread] [next in thread] 

List:       cisco-nsp
Subject:    Re: [c-nsp] 6PE: was: mpls over native ipv6?
From:       Mateusz Blaszczyk <blahu77 () gmail ! com>
Date:       2010-06-30 10:32:55
Message-ID: AANLkTilz5cLJO_KhRIU97JeUPzgnc7mQ2YmFBLQl5q4I () mail ! gmail ! com
[Download RAW message or body]

On 30 June 2010 02:57, Harold Ritter <hritter@cisco.com> wrote:
> Hi Christian,
> 
> Most recent IOS versions should support 6PE. The command "mpls ipv6 \
> source-interface" has been removed from most recent IOS versions as well. This \
> command only applied to locally originated traffic and the source address selection \
> is now as per RFC3484. 

And what IPv6 address should it be used by 6PE router when originating
ICMPv6 packets in response to traceroutes coming from behind the MPLS
network?
On 7600 with SRB7[1] and SRD[2] it takes an IPv6 address that is
configured on the first physical interface (ie. not SVI) visible in
the configuration...
Not like with MPLS/VPNs where the source address is taken from the
egress interface towards VPN.

Bug?

Best Regards,

-mat

[1] Cisco IOS Software, c7600rsp72043_rp Software
(c7600rsp72043_rp-ADVIPSERVICESK9-M), Version 12.2(33)SRB7, RELEASE
SOFTWARE (fc1)
[2] Cisco IOS Software, c7600rsp72043_rp Software
(c7600rsp72043_rp-ADVIPSERVICESK9-M), Version 12.2(33)SRD, RELEASE
SOFTWARE (fc2)
_______________________________________________
cisco-nsp mailing list  cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/


[prev in list] [next in list] [prev in thread] [next in thread]