[prev in list] [next in list] [prev in thread] [next in thread]
List: cisco-nsp
Subject: [c-nsp] 3rd party optics fail on 3560?
From: Brian Spade <bitkraft () gmail ! com>
Date: 2010-06-29 1:01:19
Message-ID: AANLkTincblUo6JUoVZi_ftThDsuhAj1mFXUoyjOvf3L3 () mail ! gmail ! com
[Download RAW message or body]
Hi,
I've been testing 3rd party optics on the various Cisco platforms we use.
Most all platforms tested support 3rd party and can share results later if
people are interested. However, the 3560 and 2960's fail. I have entered
the following commands:
service unsupported-transceiver
no errdisable detect cause sfp-config-mismatch
When I enter the optics, I get the following log message:
*Dec 26 22:43:11.085: %GBIC_SECURITY_CRYPT-4-VN_DATA_CRC_ERROR: GBIC in port
Gi0/49 has bad crc
Also, 'show int' says unknown optic:
br1#sh int gi0/49 | i media
Auto-duplex, Auto-speed, link type is auto, media type is unknown
br1#sh int status | i Gi0/49
Gi0/49 notconnect 1 auto auto unknown
I get no link with these optics. I am testing copper, MMF and SMF. All of
them behave like the above, but the 3560/2960 can read the idprom on the
MMF/SMF but not the copper (show idprom interface gig0/49).
Am I missing something? Why would these optics work on 6509, 4924, etc. but
not the 3560/2960? Thanks for any insight....
/bs
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic