[prev in list] [next in list] [prev in thread] [next in thread]
List: cisco-nsp
Subject: Re: [c-nsp] SXI1 and 2 breaks 100FX-MM boards
From: egregory <egregory () umd ! edu>
Date: 2009-08-27 13:49:52
Message-ID: 4A968F00.7010109 () umd ! edu
[Download RAW message or body]
I have run into the exact same problem here.
=======================================
Eric Gregory
Network and Telecommunications Services
University of Maryland
=======================================
Jeff Fitzwater wrote:
> We have 24 port 100FX MM boards WS-X6324-100FX-MM in a 13 slot
> chassis, and none of these modules come up all the way with SXI1 or 2.
>
> In Version 1 the modules were not even recognized yet were a supported
> device. In rev 2 they are recognized and indicate that they pass the
> diags after reload, but the status of module stays in OTHER and ports
> are non functional.
>
> The fix was suppose to be in rev SXI 2.
>
> Has anybody else seen this?
>
>
>
>
> Jeff Fitzwater
> OIT Network Systems
> Princeton University
> _______________________________________________
> cisco-nsp mailing list cisco-nsp@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic